Yes, the Holosun EPS Carry Enclosed Pistol Sight will mount directly to the optic ready slide of the Mossberg MC2C without the need for an adapter plate.
The Holosun EPS Carry Enclosed Pistol Sight will mount to the optics cutout on a Sig P365 XMacro.
This Holosun EPS Carry Enclosed Pistol Sight does not have the solar failsafe feature. It features a 2 MOA Red dot and uses a 1620 battery.
Both the Green 6 MOA (MPN:EPS-CARRY-GR-6) and Red 6 MOA (MPN:EPS-CARRY-RD-6) EPS Carry models have been added to the product page.
No, the circle dot model (EPS Carry MRS) can be found by using the link below:
https://www.opticsplanet.com/holosun-carry-enclosed-pistol-sight-w-multiple-reticle-system.html
No, the EPS Carry uses a slightly different footprint to the RMSc footprint in which slimline MOS pistols are meant to accept. An adapter plate, such as the C&H Precision Weapons V4 MIL/LEO Adapter Plate, would be required to install this optic. The plate can be found by using the link below:
https://www.opticsplanet.com/c-h-precision-weapons-v4-mil-leo-adapter-plate.html?_iv_code=5HT-SAP-CHPV4ML-GLX-EPS
The P365 SAS uses a proprietary rear sight and would not be directly compatible with optics once removed. There are slide milling services available for the P365 SAS that would allow you to accept the EPS Carry. I would recommend Nameless Armament as they do optic cuts for SAS models that would allow you to accept this optic.
Yes, the Holosun EPS Carry Enclosed Pistol Sight will mount directly to an optic ready P365 without the need for an adapter plate.
No, the Holosun EPS Carry Enclosed Pistol Sight uses the Holosun K footprint and includes an RMSc to K adapter plate. If you wanted to mount an EPS to your RMR cut slide, you would need to purchase the full size EPS model which includes an RMR to K adapter plate. The full size model can be found by using the link below:
https://www.opticsplanet.com/holosun-eps-enclosed-pistol-sight.html
Yes, the EPS Carry mounts directly to any optic ready P365 model pistol.