Your Browser is OutdatedQ&A for Live Free Armory LF17 Elite Series Pistol Slide w/ RMR Optic Cut for Glock 17 — 12 Questions & 13 Answers
Yes, the Live Free Armory LF17 Elite Series Pistol Slide w/ RMR Optic Cut is compatible with Gen 1-3 Glock 17 frames.
The Live Free Armory LF17 Elite Series Pistol Slide w/ RMR Optic Cut for Glock 17 will not work with a Glock 34.
Yes, you’ll need to transfer parts over from your old slide. In addition, you’ll need a channel liner and the proper installation tool. We used to have a video on YouTube, but it has since been taken down. However, there are other instructional videos available online—while they may not feature our brand specifically, the process is essentially the same across the board. I hope this helps!
Hey! Unfortunately there is not a Gen 4 option for the 17 at this time.
Hey you would need an adapter plate for an RMR footprint to an RMSc footprint. Or you could use the 407C or 507C without an adapter plate. I hope this helps!
You can use 6/32x7/16 screws to mount an optic to this slide!
Unfortunately they will not. You will need Flat Socket Cap screws 6x32 x 7/16.
These slides are specifically designed to work with a G17 frame and components. While some customers have used them with other frames, we highly recommend using them as intended to ensure optimal performance and safety.
The RMR cover plate requires Flat Socket Cap 6x32 x 7/16 screws.
The Live Free Armory LF17 Elite Series Pistol Slide w/ RMR Optic Cut for Glock 17 will work with a factory Glock 17 barrel.