Your Browser is OutdatedQ&A for NightForce NX8 Rifle Scope, 4-32X50mm, 30mm Tube, First Focal Plane — 17 Questions & 20 Answers
MOA per revolution is not a specification provided by Nightforce. They only provide that it has the following maximum adjustment range:
Internal adjustment range
E: 90 MOA / 26.2 MRAD
W: 70 MOA / 20.4 MRAD
Total travel is 90moa/26.2mil. Not bad for a 32x optic
Either the .885 Low A118 or the usually more comfortable 1.0 Medium A101 will work. The .885 may have some interference with the bolt throw and the eyepiece lens cap.
Yes, it has the same Zerostop system as the NXS and ATACR lines do.
No, but you can find one built by Tenabraex at armament.com that fits our optics.
This would depend on your mounting system. Generally a ring like A203 XTRM - Ring Set - 1.5" XX-High - 30mm - Ultralite™, 4 screw would work.
Yes these come with the flip up lens covers.
Our recommendation would be rings 1 inch in height. Our A101 rings would be a good choice.
On an AR style platform we recommend 1.5" high rings or mounts. Our most common recommendation for your application would be the A221 Unimount if you want 20 MOA in the mount, or the A496 Unimount with 0MOA.
This optic does indeed come with front and rear flip caps. As for the ring height, if you are using Nightforce Rings, I would recommend using our 1.375" High Rings to make sure you have plenty of clearance between the objective and the hand guard of the MPR.