Your Browser is Outdated
The Kaw Valley Precision OPMOD Hybrid-K Linear Compensator is not compatible with a Glock 19. Please email us at Techsales@opticsplanet.com for assistance with selecting a compensator for your Glock 19.
The Kaw Valley Precision OPMOD Hybrid-K Linear Compensator does not include a crush washer. However, a crush washer should be used in order to time the compensator properly (vertical ports in an eleven/one o’clock orientation).
The Kaw Valley Precision OPMOD Hybrid-K Linear Compensator model KVP-OPMOD-03 can be used on a 9mm pistol with a threaded muzzle of 1/2x28
Yes, the .30 caliber Hybrid-K Linear Compensator is designed to work with .308 Winchester and is available in 5/8x24 threading, which matches the SR762's barrel threading.
A crush washer is not strictly required; the manufacturer states you can use a crush washer or another timing device, such as shims, as long as the vertical ports end up oriented at the eleven/one o clock position.
This compensator doesn't slid down over the barrel. It screws on via the threads on the barrel. The total thread length is 3/4 inch.
The outer diameter is 1 inch.
This is a question that would be better answered by your state authorities. It is a linear comp and it will affect muzzle flash and recoil some even though its main job is to redirect sound down range.
I’m about to find out, I just order one yesterday for my tx22, I’ll let ya know
As long as the Threads Per Inch are the same, and you select the correct caliber, this would work on any standard barrel.