I have the kilo 2200 and the sig kilo 3000 it connects a lot faster than the Sierra 3 products then add a kestral 5700 and OMG makes life sweet
Email us at Techsales@opticsplanet.com for assistance.
As far as you can engage targets accurately.
I use the sig alpha3 mount with 20 moa.. I believe the height from top of pic rail is 1.535” to the center of scope tube.. it leaves the bottom of the objective lens about 1/4” from the top of pic rail.. Perfect if you use scope caps or a neoprene scope cover.. I had the scope mounted in a Burris PEPR mount, 0 moa, but there wasn’t enough room for the 1/8” neoprene scope cover to slide under the objective end…if you want this scope as close to rail as possible get the Burris PEPR
I used standard medium 34 mm rings on my 338 Lapua Magnum. Hope this helps.
Yes, the SIG SAUER Sierra6BDX 5-30x56mm Rifle Scope can be used on an FN SCAR 17.
The Sierra6BDX series scopes have more ballistic data points to make more accurate shots at distances and has clearer glass than the Sierra3BDX.
Yes the kilo 8k will be able to connect with all BDX scopes.
The manufacturer doesn't specifically state the torque specs for mounting this scope probably because that depends on the rings you plan on using with the Sig Sauer Sierra6BDX 5-30x56mm Riflescope 34 mm Tube. Most 34mm Rings recommend somewhere between 20-25in-lb.
Yes it will.