Will this pad fit the Mossberg Silvereserve over and under also ? — 1 Answer

It may depending on the size specifications of your stock, but this is meant specifically for a Mossberg stocks. You will need to measure the rear of your stock and verify whether it matches the dimensions of this recoil pad:

Template Dimensions:
5.175" X 1.680"
(Approx.) 5 - 3/16” x 1 - 11/16”

Here is some other fit information provided as well:

"The #10201-#10809 is also equipped to fit the same Mossberg with different screw hole specs. If your screw placement is 15/16” from the heel to center of first screw hole and 7/16” from toe end to center of first screw hole then you will need the included adapter plate. Simply unscrew the original stock pad and place the adapter plate beveled side down towards the inside of the stock. Use the provided screw to install the adapter using the 3rd screw hole which is located 1 3/8” from the toe end. You are now ready to install the LimbSaver recoil pad. (Please remember to use the screw that came with your stock)"