Q&A for Truglo Omnia 1-4x24mm MSR Rifle Scope w/APTUS-M1 mount — 11 Questions & 9 Answers

The Truglo Omnia 1-4x24mm MSR Rifle Scope has an eye relief of 3.75".

Truglo is a reliable brand i think you would be happy with.

Overall length is approximately 10 inches.

The mount raises the rifle scope to around 1.5" height and will be directly in line with standard iron sights on an AR platform. You cannot use your iron sights with this scope because it is magnified.

Maximum eye relief is approximately 3.75" and this is TruGlo's description on re-indexing the turrets:

"After you have zeroed the point-of-aim of your scope to the point-of-impact, the turret caps will likely be in the
incorrect position (indexed to any number other than “0” ) and will need to be indexed correctly. To “slip the caps” back
to “0”, first make sure the turrets are in the locked position. Use the included torx wrench to loosen the screw on the
end of each turret cap. (It is not necessary to remove it completely, just enough for the cap to turn freely) Once the cap
can rotate freely, align the “0” mark to the indexing dot on the scope body. The turret should NOT click when rotated
(as the turret is in the locked position and only the external turret cap is moving). Re-tighten the screw on the cap to
hold the cap firmly in place. Do not over-tighten. Do not apply threadlocker to this screw.

With the scope and caps now properly adjusted, you will be able to dial additional adjustments (bullet-drop, wind,
spin-drift, etc.) into the optic as needed for a particular shot and then return the optic back to your predefined zero. "

It is second focal plane.

17.6 ounces

The length should be right at 10 inches.