Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
If you ever remove AR Barrels!
If you pull apart your .308 up to removing barrels or plan to. You should keep a set or 2 of these on hand. Some barrels need them some do not. If your barrel is shimed removal can mess thin shims up. Having all this kind of little stuff on hand has simply made messing around with configurations way more possible.
Sucks when you just about have your new build or replacement complete just to find you have to order parts.
Great Item
Good quality, I recommend getting 2 though...the barrel nut was so in between mounting holes that I actually needed a few more...I made it
work just by tightening and retightening multiple times. After the next to last seating, I checked on the shims just to make sure they were good for a final clamp down (sometimes the paper-thin ones can get damaged) and they looked excellent...don't hesitate to buy just make sure you get enough.
work just by tightening and retightening multiple times. After the next to last seating, I checked on the shims just to make sure they were good for a final clamp down (sometimes the paper-thin ones can get damaged) and they looked excellent...don't hesitate to buy just make sure you get enough.
Pros:
- Perfect Fit
- packaged well
- Good Quailty
Cons:
- None
Best Used for:
- ar - 10
Would recommend: Yes
Great Item
Good quality, I recommend getting 2 though...the barrel nut was so in between mounting holes that I actually needed a few more...I made it
work just by tightening and retightening multiple times. After the next to last seating, I checked on the shims just to make sure they were good for a final clamp down (sometimes the paper-thin ones can get damaged) and they looked excellent...don't hesitate to buy just make sure you get enough.
work just by tightening and retightening multiple times. After the next to last seating, I checked on the shims just to make sure they were good for a final clamp down (sometimes the paper-thin ones can get damaged) and they looked excellent...don't hesitate to buy just make sure you get enough.
Pros:
- Perfect Fit
- packaged well
- Good Quailty
Cons:
- None
Best Used for:
- ar - 10
Would recommend: Yes
good to have around
I used these to help time a barrel but for a PRI handguard on my last AR10 project.
Would recommend: Yes
0 of 1 found the following review helpful.
These shims are the way to go
These shims come in a pack. Are stainless steel and there are multiple different sizes from .002" to .010" with 2 of each of the thinnest ones. I have used these for multiple builds. And I highly recommend them.
Would recommend: Yes
These shims work great
There are enough shims in this pack of different thicknesses to shim any AR10 platform barrel. And they are stainless steel.
Would recommend: Yes
This shim pack is perfect
This shim pack has enough shims to adjust any barrel nut on an Ar10. So far, I've used them on 5 builds. They work perfectly.
Would recommend: Yes
Necessary part
Did what I needed it to do. Shimmed the barrel nut out enough that I could get it aligned within the specified torque range
Would recommend: Yes
There are no reviews that match your criteria. Would you like to review this product?