by
skinner,
Verified Owner
from OH, United States
Written on June 15, 2025
A must have for your Aero M5 lower. The pin is the correct length. Other pins may work but a little shorter. Pin has a small indent in end so you can push it out easier. Although 10 bucks is quite a lot for a pin.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Scott Bullard,
Verified Owner
from NC, United States
Written on September 8, 2024
Fit and finish is of nice quality. Would recommend for any Aero Precision M5 build
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
akeith1911,
Verified Owner
from AR, United States
Written on July 7, 2024
Fits my 17 designs Ar10 lower perfect! Detent and length were where they needed to be unlike all the other "Ar10" pins.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Big Ruger,
Verified Owner
from UT, United States
Written on April 9, 2024
This is the correct pivot pin for the Aero m5 AR-10 lower. This pin will extend all the way through so you can push the pin and disconnect the lower from the upper.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Wham,
Verified Owner
from SC, United States
Written on December 21, 2023
The right size and length for Aero M5 lower build. Just does its job.
Pros:
- The length is correct for m5.
Cons:
- May be too long for other .308 lowers.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Jon,
Verified Owner
from NY, United States
Written on September 29, 2020
This SI option is very well made and priced. I would have loved that the SI symbol was closer to the edge but that's just my personal preference to have the mag release closer to the lower, opposed to sticking out. Very satisfied with it.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
adam,
from VA, United States
Written on June 2, 2019
putting together a aero precision M-5 , this is my go to place for parts,part is a perfect fit and looks great as well, serves was extremely fast , any issues these people will help you out fast thanks for the great product
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Jim,
from PA, United States
Written on January 15, 2019
I recently purchased an Aero Precision M5 lower from another site that they completed with what seemed like A Bushmaster lpk. Many of the AR15 parts work well for the Aero M5 and other AR308 platforms but you may find like I did that the pivot pin is short and requires something to start the pin out. If you have this problem this is exactly what you need. Aero makes great products all around, this pin included. It even has a small hole to place a punch through should you have to remove it later.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?