by
Deago,
Verified Owner
from OH, United States
Written on November 27, 2022
Purchased this handguard for a 4.5” 9mm upper. It fit okay and seemed sturdy enough. Cracked a piece of the barrel nut off while mounting. Should have stopped there.
Torqued the barrel on and dry fired it over a few days. Within that time, the barrel had came loose so I removed it, degreased the threads and applied some Rocksett. After a day or two same thing happened. There’s too much slop in the threads for Rocksett or red Locitite to get a good bond. Don’t waste your time or money.
Cons:
- Fit
- Functionality
- purpose
Would recommend: No
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Danh70,
Verified Owner
from WI, United States
Written on August 1, 2022
Price was great and the shipping was very fast but it was not really a matte color and had too much shine on the Finish but as far as always goes it's not bad for the price you pay just expect to you probably have to repaint or deal with the extra gloss
Would recommend: Yes
2 of 2 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
LeGen,
from TX, United States
Written on February 23, 2022
First off - I need to quit buying full length quad rail handguards! The extra (3) rails add a lot of weight and I will never use them all, my bad.
Clean appearance, solid feel. Includes the barrel nut, Good price point.
I have not had time to install it yet. Stalled on finding a barrel I like for my next build.
If you're looking for a heavy build (target, long range etc.) this is fine.
If I was tramping through the woods hunting I'd go for a lighter handguard. One rail and then use the MLOK slots in the unlikely case I needed to add lights/lasers/etc.
Don't like! The MLOK slots are at a 45 degree angle. I did not notice this before buying.
My accessories with 2 nuts will not fit into the slots properly! I was thinking about putting backup sights on the 45 degree portion, but no joy!
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
NA,
from PA, United States
Written on March 2, 2018
This is my go to product for my builds. Very affordable and fits just about any application.High quality and sturdy. A great value. I particularly like the barrel nut. It allows for easy alignment of the gas tube and the quad rail.
Would recommend: Yes
2 of 2 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Norman,
Verified Owner
from NC, United States
Written on June 11, 2017
the fit and finish were very good cant beat it for the price it was just as advertised will Defiantly buy for my next build.
shipping was fast and on time i have been very pleased with all my purchases from Optics planet.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Garrett,
from AL, United States
Written on March 10, 2017
Love the aim sports quad rails. The rail was extremely easy to install, and it has a great look on my rifle. The handguard definitely had a durable feel to it, and although I have not put it through a lot of field testing yet, I believe it will keep it's functionality for a long while.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Don Le,
Verified Owner
from CA, United States
Written on November 29, 2016
This is my first ar 15 build and the product is great. The rail is solid. It lined up perfectly with my upper receiver. The construction for the float is well made. I will get the rifle length for my next build. The barrel nut was not as well made because the holes where the tool were placed were bent due to stress pressure. I had to carefully apply the torque to not damaging the nut too much. However, once the nut is installed, it was easy to tight down the float. There was only one screw to hold the float to the barrel but it did its job. I was satisfied with the product for the price I paid.
Pros:
- Fit & feel great
- Float is well made and sturdy construction
Cons:
- Barrel nut is lower quality
- Only one screw to hold float to barrel nut
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Griever,
from CA, United States
Written on November 17, 2016
I knew next to nothing about ar's but after a little research and common sense I found it extremely simple and easy to do provided you have the right tools. You will need an armorer's tool/barrel nut wrench and a vice to equip this rail. I've heard complaints about the barrel nut being aluminum. I don't really see the problem. For the price, it's definitely a nice rail for a budget build and would absolutely recommend it to someone else looking to upgrade their ar on a budget.
Would recommend: Yes
1 of 1 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?