Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Armasight SFRS
Mount is made well ,a little heavy, and the finish is easily dinged. Used it with a S&B 4-16 (34mm tube) and a L3 pvs-24 . Everything lined up perfectly. It took the 308 recoil without losing center. If the finish was harder, the top turret hole larger and a bit lower (the Schmidt worked fine but i can see units with lower top turrets having a problem) ,and the mounting system on the scope mount a ARMS type I would have given it a 5. It is definitely a better bargain, price point wise, than it's competitor.
Would recommend: Yes
USMC item is constructed well and solid but does not line up with the 640 100 mm Termal system
The system is built tough and solid . Con;
1: The rail system does not line up with the Armasight 640 Pro 100 mm when using the Votex rifle scope as a front end clip on it needs to have a added raiser of 1-4 inch to clip on and live up perfectly.
2: the top hole where the elevation should go through does not provided enough space for the scope to be place and used with the top rail place on top of the scope. It has to be milled or grounded an 1/8 of an inch on both sides inorder for the elevation action adjustment to work and place the clip on rail system.
1: The rail system does not line up with the Armasight 640 Pro 100 mm when using the Votex rifle scope as a front end clip on it needs to have a added raiser of 1-4 inch to clip on and live up perfectly.
2: the top hole where the elevation should go through does not provided enough space for the scope to be place and used with the top rail place on top of the scope. It has to be milled or grounded an 1/8 of an inch on both sides inorder for the elevation action adjustment to work and place the clip on rail system.
Would recommend: Yes
There are no reviews that match your criteria. Would you like to review this product?