Your Browser is Outdated
B-Square Air Gun Adapters & Risers - 3/8" to "Weaver" Adapter (2-piece base), Blue 17025
Currently Unavailable
View Product
Compare (0)
1 item has been added
Add at least two items to compare
RaginCajun76's Review of B-Square Air Gun Adapters & Risers - 3/8" to "Weaver" Adapter (2-piece base), Blue 17025
Bought these adapters hoping to be able to use Weaver style rings on a Henry H001TV .17 HMR rifle.
I had the Burris Signature Rimfire 1" Medium Rings (420554) but they were just too low to allow the BSA Sweet 17 scope to clear the rear sight. I got the same Signature Rimfire Rings in "High" but they now had more height than necessary. So I tried these adapters with the Burris Signature Zee Weaver-Mount 1" Medium Rings (420521).
Height-wise, the B-Square adapters w/ the Burris Weaver-style 1" Medium rings were right in the middle between the Burris Rimfire Medium and High Rings. Perfect!
When I tried to slide the B-Square adapters on the Henry's 3/8" dovetail they were closed too much and wouldn't fit. I had to take a small flat blade screwdriver and open them up a bit. After a couple of tries, I got them open enough to slide on fairly easily. Put them in the positions I needed and snugged down the two allen screws on each adapter. They are held firmly in place, and the correct size allen (hex) wrench is supplied w/ the adapters.
Mounted the Burris Signature 1" Medium Rings, attached and leveled the scope and I'm done.
Even with having to spread them open a bit, there was little frustration with these adapters.
I had the Burris Signature Rimfire 1" Medium Rings (420554) but they were just too low to allow the BSA Sweet 17 scope to clear the rear sight. I got the same Signature Rimfire Rings in "High" but they now had more height than necessary. So I tried these adapters with the Burris Signature Zee Weaver-Mount 1" Medium Rings (420521).
Height-wise, the B-Square adapters w/ the Burris Weaver-style 1" Medium rings were right in the middle between the Burris Rimfire Medium and High Rings. Perfect!
When I tried to slide the B-Square adapters on the Henry's 3/8" dovetail they were closed too much and wouldn't fit. I had to take a small flat blade screwdriver and open them up a bit. After a couple of tries, I got them open enough to slide on fairly easily. Put them in the positions I needed and snugged down the two allen screws on each adapter. They are held firmly in place, and the correct size allen (hex) wrench is supplied w/ the adapters.
Mounted the Burris Signature 1" Medium Rings, attached and leveled the scope and I'm done.
Even with having to spread them open a bit, there was little frustration with these adapters.
Pros:
- Low profile
- Solid fit
- Cost-Effective Solution
Cons:
- Had To Spread Them Open - Minor Issue
Best Used for:
- Rimfire Applications
Would Recommend:
Yes
1 of 1
found the following review helpful.