Your Browser is Outdated
Breek Arms OPMOD 2 Port Muzzle Brake for 223/556 Caliber, 1/2x28 Threads
Currently Unavailable
View Product
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
AWESOME!!!!
I love this product. Not that 5.56 has much recoil but adding this to my gun reduced the recoil quite a bit. You will notice a difference. Not to mention it looks cool.
Most Helpful Negative Review
smaller than it looks
This muzzle brake is much smaller than it looks online. It doesn't do much in way of recoil reduction. When it starts to get heated up, it caused a POI shift
Great Brake for the price!
This is my second Breeks Arms 2 Port Brake I have purchased, both for 556. I have to admit they hold up just as good as my two other muzzle brakes that both cost 95-120 a piece. Great product, and I get to save money for ammo!
Pros:
- None
Cons:
- None
Best Used for:
- AR Platform
Would recommend: Yes
Good 223 muzzle break Not so good crush washer.
I like this muzzle break. I bought it to use on a Ruger 22 Charger and not on a 223.
When I test fitted it, it was pretty good but needed about a quarter turn to hit the timing correctly. The crush washer was so stiff, I couldn't get a quarter turn out of it, so I wound up shimming it. With the shims, the timing was close but off by a couple of millimeters past dead on. I could have fixed off by a couple of millimeters ahead of zero, but not past it. .
I'm shooting 3/4 inch, or less, groups at 25 yards after the changes I've made to the Charger and without the muzzle break, so I decided to leave it off because the muzzle break wasn't likely to improve anything up to the point of a just noticeable difference, and there was a chance it would degrade the accuracy.
However, this is a well made break, but it needs some shims, as well as a crush washer, in the package.
When I test fitted it, it was pretty good but needed about a quarter turn to hit the timing correctly. The crush washer was so stiff, I couldn't get a quarter turn out of it, so I wound up shimming it. With the shims, the timing was close but off by a couple of millimeters past dead on. I could have fixed off by a couple of millimeters ahead of zero, but not past it. .
I'm shooting 3/4 inch, or less, groups at 25 yards after the changes I've made to the Charger and without the muzzle break, so I decided to leave it off because the muzzle break wasn't likely to improve anything up to the point of a just noticeable difference, and there was a chance it would degrade the accuracy.
However, this is a well made break, but it needs some shims, as well as a crush washer, in the package.
Pros:
- None
Cons:
- crush washer
Would recommend: Yes
Finally a break worth the money.
It's well worth the money.. Comparable to my Lantac Dragons for a quarter of the price!
Pros:
- $ well spent
Cons:
- None
Best Used for:
- Minimizing muzzle rise
Would recommend: Yes
muzzle devices
Happy again, with my large choice of muzzle devices. I wanted something different for my new 9 mm build. Arrived promptly. I was satisfied with my selection.
Would recommend: Yes
Good slim muzzle device
This muzzle device is pretty slim and square. It definitely added some better control and less rise on a 16inch upper. I am going to try it on a 10.5 inch upper and see if the recoil reduction is more noticeable.
Would recommend: Yes
2 of 2 found the following review helpful.
Fun Size, Looks Good, and Affordable
This muzzle brake is very small! It measures about 1/2" wide and 1-3/4" long. I'm using it on my Ruger 10/22, so it worked out, but I wouldn't use it on a 223/556 caliber firearms.
Pros:
- compact
- Affordable
- Nice finish
Cons:
- Too Small for 223/556 Caliber
Best Used for:
- .22 Rimfire Caliber Rifles and Pistols
Would recommend: Yes
1 of 2 found the following review helpful.
Works as advertised
Not much recoil reduction as far as I can tell. Maybe it's due to the 16" barrel. But it looks cool and has good quality. Love the fireball.
Would recommend: Yes
Breek Arms OPMOD 2 Port Muzzle Brake for 223/556 Caliber, 1/2x28 Threads
Good quality muzzle brake and nice fit. Aesthetically pleasing.
Pros:
- Aesthetically pleasing, strong materials
Cons:
- None
Would recommend: Yes
2 of 2 found the following review helpful.
breek arms muzzle brake
Work nice on my 10.5 aero and feels good and does its job...
Would recommend: Yes
2 of 2 found the following review helpful.
There are no reviews that match your criteria. Would you like to review this product?