Your Browser is Outdated
Breek Arms AR-10 Warhammer Mod2 Micro Ambidextrous Charging Handle
Currently Unavailable
View Product
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
Breek Arms Warhammer mo2 micro charging handle
My PSA Gen3AR10 came with a charging handle which made it hard to charge the rifle with a scope on it I added a extended lock lever on it but it only pulled from one side and didn’t like the feel of it plus was hanging on stuff so I sprung for the Breek Warhammer mod2 micro and I’m glad I did this thing is well made and smooth like butter it dropped in with no effort and has taken my AR10 to another level as it works and does everything perfectly for me
Breek Arms AR-10 Warhammer Mod2 Micro Ambidextrous Charging Handle
This is the second Breek Arms AR-10 Warhammer Mod2 Micro Ambidextrous Charging Handle I've acquired in recent few months. The first was for a PSA Gen 3 (AR-10) 20" upper in 6.5CM on a Sabre lower. Replacing the standard charging handle was an absolute must--it's wings are too small to access a more positive grip with or without gloves, especially if a scope's objective is crowding the area. The Mod2 Micro wings are sufficiently larger and more robust, but not so much as to be prone to snagging gear. It works well and really makes a difference.
I acquired the second Warhammer Mod2 Micro for basically the same reason; but this one replaced the stock charging handle on a PSA Gen 3 upper 16" in .308 on a Sabre lower. Both rifles have benefited from upgrading to the Warhammer Mod2 Micro. I haven't run either suppressed yet, but the new year holds promise--we'll see.
I acquired the second Warhammer Mod2 Micro for basically the same reason; but this one replaced the stock charging handle on a PSA Gen 3 upper 16" in .308 on a Sabre lower. Both rifles have benefited from upgrading to the Warhammer Mod2 Micro. I haven't run either suppressed yet, but the new year holds promise--we'll see.
Would recommend: Yes
Robust improvement over stock handle
I'm using this Breek Arms AR-10 Warhammer Mod 2 ambi charging handle on a PSA Gen 3 PA65 20" upper on a Sabre lower.
The original non-ambi charging handle, while functionally adequate, was simply a bear to effectively grip & pull--the too-small wing-levers yield insufficient area for good leverage. Any rear sight or mounted scope can further restrict one's finger access--it can be even worse with gloves. The Warhammer's larger wing-levers are ambi, far more forgiving, and provide adequate grip/mechanical advantage to efficiently rack & charge the heavier sprung BCG of the AR-10 style platform.
I've not yet tried the Warhammer supressed; so, I can't comment in that regard about it's gas-handling characteristics on this 6.5CM semi-auto gas gun. However, I am hearing some good things about it. Hmm, maybe we'll see . . .
The original non-ambi charging handle, while functionally adequate, was simply a bear to effectively grip & pull--the too-small wing-levers yield insufficient area for good leverage. Any rear sight or mounted scope can further restrict one's finger access--it can be even worse with gloves. The Warhammer's larger wing-levers are ambi, far more forgiving, and provide adequate grip/mechanical advantage to efficiently rack & charge the heavier sprung BCG of the AR-10 style platform.
I've not yet tried the Warhammer supressed; so, I can't comment in that regard about it's gas-handling characteristics on this 6.5CM semi-auto gas gun. However, I am hearing some good things about it. Hmm, maybe we'll see . . .
Pros:
- Fit & finish
Cons:
- none yet
Would recommend: Yes
Break Warhammer AR-10
First impressions are good but on install it was a bit tight. Had to lightly sand the sides to get it to ride smoothly down the track. Nothing to serious. Otherwise it works as advertised. Like the look and feel on the release. This was in a Bear Creek Arsenal AR-10 upper chambered in .243 Winchester.
Pros:
- Price and feel
Cons:
- tight fit
Would recommend: Yes
Good Quality
A very good charging handle at a great price point.
Pros:
- Good build quality
Cons:
- None
Would recommend: Yes
Great charging handle!
This fits and functions well my 308. I have one for my 556 also. Will probably get one for my 300 blackout too.
Pros:
- Fit and Function
Cons:
- None
Would recommend: Yes
great charging handle!
Discharging handle fits and functions perfectly. It also works well with suppressors. I have one on both 556 and 308.
Pros:
- Fit and function. Reliability.
Cons:
- None
Would recommend: Yes
Ar10 Ambi CH
The product itself it’s great quality. I messed up by ordering the micro CH which feels a little small for my larger .308. Nonetheless, it does the job perfectly
Would recommend: Yes
A more Functional Handle
I had a clearance issue between my scope and charging handle on my Saint Victor 308. This Mod2 Micro is thinner than OEM and can be pulled asymmetrically from either side. Between this solution and purchasing a slightly higher scope mount; problem solved. The only drawback that should be easily overcome with some repetitions is that at least one of the wings of the handle need to be pulled back to stow forward manually. If you release the bolt however, the handle locks in nicely. It's light and strong. Overall, a very nice addition that adds needed functionality.
Pros:
- light
- easy to grip
- Cool Looking
- Can be charger from asymmetrically from either side
Cons:
- Thinness and stowage take getting used to
Would recommend: Yes
Breek arms AR-10 warhammer
I have 3 of these and so far they have worked flawlessly. They look great and they aren’t too expensive.
Would recommend: Yes
There are no reviews that match your criteria. Would you like to review this product?