Your Browser is OutdatedReviews by Ben
Wrong Thread Size
Written on Oct 08, 2025
Review for
NightForce Remington 700 One-Piece Base
this review is for 'NightForce R700 SA One-Piece 20MOA Rail #A115'. received 'as new' in a timely fashion. hole pattern matches perfect to my 'Bergara HMR PRO BPR20-65PRC' but the accompanying screws are the wrong size. further, the base is not relieved to use the correct size screw [8-40]. milling the base [holes and relief] will be required to fit the proper screw shank and head.
Wrong Screws and Hole Size
Written on Oct 01, 2025
Review for
NightForce Remington 700 One-Piece Base
this review is for 'NightForce Rem 700 SA One-Piece 20MOA Base #A115'. received 'as new' in a timely fashion. hole pattern matches perfect to my 'Bergara HMR PRO BPR20-65PRC' but the accompanying screws are the wrong size. further, the base is not relieved to use the correct size screw [8-40]. milling the base will be required to fit the proper screw shank and head.
Recommendation is 'Conditional' [2 of 3]
Written on Nov 08, 2023
i did a 3 way buy of .300Bo ammo for hunting, all 3 were shot from a 'PSA 16" 1/8 twist barrel', here's my results at 100yd:
1.Barnes Vor-Tx 110gr TAC-TX FB #21548 - [most accurate, sub MOA]
2.Hornady BLACK 110Gr V-MAX #80873 - [a bit less than accurate than TAC, at 1 MOA]
3.Sig Elite 120gr OTM #E300H1-20 - [least accurate, at +1 MOA]
1.Barnes Vor-Tx 110gr TAC-TX FB #21548 - [most accurate, sub MOA]
2.Hornady BLACK 110Gr V-MAX #80873 - [a bit less than accurate than TAC, at 1 MOA]
3.Sig Elite 120gr OTM #E300H1-20 - [least accurate, at +1 MOA]
4 of 4 found the following review helpful.
Recommendation is 'Conditional' [1 of 3]
Written on Nov 08, 2023
i did a 3 way buy of .300Bo ammo for hunting, all 3 were shot from a 'PSA 16" 1/8 twist barrel', here's my results at 100yd:
1.Barnes Vor-Tx 110gr TAC-TX FB #21548 - [most accurate, sub MOA]
2.Hornady BLACK 110Gr V-MAX #80873 - [a bit less than accurate than TAC, at 1 MOA]
3.Sig Elite 120gr OTM #E300H1-20 - [least accurate, at +1 MOA]
1.Barnes Vor-Tx 110gr TAC-TX FB #21548 - [most accurate, sub MOA]
2.Hornady BLACK 110Gr V-MAX #80873 - [a bit less than accurate than TAC, at 1 MOA]
3.Sig Elite 120gr OTM #E300H1-20 - [least accurate, at +1 MOA]
5 of 5 found the following review helpful.
Recommendation is 'Conditional' [3 of 3]
Written on Nov 08, 2023
i did a 3 way buy of .300Bo ammo for hunting, all 3 were shot from a 'PSA 16" 1/8 twist barrel', here's my results at 100yd:
1.Barnes Vor-Tx 110gr TAC-TX FB #21548 - [most accurate, sub MOA]
2.Hornady BLACK 110Gr V-MAX #80873 - [a bit less than accurate than TAC, at 1 MOA]
3.Sig Elite 120gr OTM #E300H1-20 - [least accurate, at +1 MOA]
1.Barnes Vor-Tx 110gr TAC-TX FB #21548 - [most accurate, sub MOA]
2.Hornady BLACK 110Gr V-MAX #80873 - [a bit less than accurate than TAC, at 1 MOA]
3.Sig Elite 120gr OTM #E300H1-20 - [least accurate, at +1 MOA]
2 of 2 found the following review helpful.
My 2nd Set
Written on Aug 26, 2023
this review is for , installed on a G35-G3 upgraded with a 'Barsto' GSF barrel and tungsten FL-GRod. shipping took a bit longer than usual, item arrived as advertised, new and undamaged. unit installed without issue, live fired at 7yds, POA center mass hold had the POI in the 'X' ring. fully satisfied with the results, i'd buy again.
Comfortable Works Great
Written on Oct 11, 2020
every earmuff i've tried hurts the top of my head, maybe because i have a pin head, not sure. i've always worn custom molded ear plugs but they can make it hard to hear when you not shooting. i tried this behind the neck model and i love them, should have done these years ago.
My Favorite
Written on Oct 11, 2020
Review for
Al Mar Knives Eagle Ultralight Fold Knife
i've carried one of these for years, slender, light weight, great steel and worth every penny. sometimes they can get hard to find so i ordered an extra. be advised, this blade length my put you in the 'weapon' category. but i think that's the best part about it.
Works Great
Written on Oct 11, 2020
when i initially saw this product, i thought it as unnecessary. the following year a friend of mine showed me some wear he was getting at that point in his match rifle. i instantly knew he needed this roller pin. i then bought one of these just to try, only the pin w/o the key. i instantly noticed the carrier felt smoother and whether it's a GI or piston, smoother is better. i've since installed 5 of these in my own match uppers and a couple of friends.
3 of 3 found the following review helpful.
Defective Upon Arrival
Written on Oct 11, 2020
i was recently shooting a HPR match and a couple of guys had this scope. they liked it, so i thought i'd give it a try. it arrived quickly but i noticed the interior box was slightly damaged and sealed with blue masking tape. i immediately pulled it out of the box and noticed no physical damage. but when i went looked out the window it would not, cleanly, focus on anything as close as 100yds, with or w/o my glasses on. i think this was already damaged, returned earlier and reshipped to me. so if you can get one that will focus, maybe it'll perform fine but i'll be trying something else.
3 of 3 found the following review helpful.
There are no reviews that match your criteria. Would you like to
reset filters?