Your Browser is OutdatedReviews by bravo5two
It works but watch your supporting hand
Written on Mar 31, 2026
I needed a loader for Stribog 9mm stick magazines and there isn't a loader out there made specifically for this magazine. The Elite Tactical Universal Rifle Mag Loader seemed to fit the bill. It does work with 9mm stick magazine, however, you really have to hold the magazine in place tightly before pushing the charger. It could only load 5-10 rds at a time. The biggest issue I had with it, my supporting finger got jammed in the gap between the loader and its charging handle, quite bloody a few times so I put it away. It works better with AR15 magazines so I don't recommend using it for anything else.
Wear glove when using this product!
Written on Dec 26, 2025
I had great hope when I found this ETS Universal Rifle Magazine Loader, it is supposed to work with PCC magazines. Yes, it does work but not without being finicky about how you hold the mag in place prior to push the loading 'slider', a hit-or-miss operation with CZ and Stribog 30-rds stick mags. Jammed my middle finger in between the 'slider' and the loader body a few times (thus the 'wear glove' heads up). I could get 9-10 rds loaded most of the times after started the magazine with 1 or 2 rds to push down the follower. Too much hassles for what it is worth in efforts. Not recommended.
Exactly what my Scorpion needs!
Written on Jun 22, 2025
The new Strike Ind. Overmolded Enhanced grip is the answer I've been looking for. I've tried 3 other brands including Magpul and they were all either too skinny or still at the wrong angle for a tucked in SMG-style shooting. Along came this new grip so I decided to sink some more money into the Scorpion, and it worked! The grip is larger than Magpul with nice grippy surfaces without the cheese grater nubs of Magpul. It allowed the elbow down, tucked in style shooting. I'm getting another one for my other Scorpion!
Very good comp for Ruger 22/45
Written on Mar 31, 2023
I wanted a bit of weight out front of my 22/45 Lite and saw this Pro Comp in steel. Wow, very nice machine work on this comp. Fit and finish is outstanding! The comp weight out front of my pistol really keeps the pistol tracking smoothly during target transition. Well worth the money
Exactly what the Sig 365XL needed!
Written on Jun 26, 2022
Review for
Wilson Combat WCP365 XL Grip Module
The 365XL is a great EDC with plenty of capacity on board. However, from day 1 I wished its grip could be a bit larger to fit my hands better. Wilson Combat answered my wish with this grip module! Easy to swap out the old grip module, install the provided mag release, and ready for testing. The module performed flawlessly and provided me with that extra girth for better grip. The grip texture is quite aggressive and sharp, but a bit of emery cloth easily knocked off the sharpness. Overall, the WC 365XL grip module is highly recommended for those looking for a bit larger grip.
1 of 1 found the following review helpful.
It is truly XL
Written on May 22, 2022
I've been using the earlier K2 grip on my chassis-equipped CZ455 rifle but wanting something a bit thicker. The new MOE K2XL fits the bill perfectly! It has the same vertical angle as the original K2 but with roughly 20% more girth, filling my hand better. This grip, however, does not have the rubberized cover as the original K2. Very good product as usual from Magpul. It is highly recommended for any rifle precision chassis that uses AR grip interface.
0 of 1 found the following review helpful.
Solid QD Sling Swivel receptacle
Written on Apr 24, 2022
This is my 4th QD sling swivel adaptor from UTG Pro. I initially bought 2 to try out and the Pro series products live up to the name. Very solid. The M-Lok attachment is good without any plays. The QD receptacle is sized correctly for all of my QD swivels. This product is good to go.
2 of 2 found the following review helpful.
Super soft recoil pad
Written on Dec 22, 2021
Review for
Limbsaver Magpul SL Stock Recoil Pad
I recently acquired a new 12 ga shotgun that uses Magpul SL adjustable carbine stock and needing a softer butt pad for it, a quick search revealed that Limbsaver makes one to fit this stock. Fitment is 100% drop-in but must use the screw from the original Magpul SL stock. Test firing the shotgun with full power 1 oz slugs after Limbsaver installation was much more pleasant comparing to the original SL rubber pad. The top of this recoil pad is a little too sticky for my taste, it can grab/snag my shirt or jacket during the mounting process, but only a minor issue and can be minimized with a slight change in my gun mounting process. Highly recommended for hard kicking rifle or shotgun that uses the Magpul SL stock.
Good bipod for the money
Written on Dec 09, 2021
Review for
Magpul Industries The Magpul Bipod for M-LOK
As with anything Magpul made, this bipod is very good for the intended application, which is to help provide front support for the rifle shooting from the bench or prone position. It is lightweight and easy to deploy. Once deployed, the adjustments are easy to make on the fly with tilt and pan motions. When its legs are fully extended, the AR can be used in prone position with a 30 rds magazine. I purchase the one for 1913 rail mount, it is not for quick removal and stayed on solidly. Worth the hundred bux!
Super lightweight Sling Pack
Written on Dec 04, 2021
Review for
Osprey Daylite Sling Daypack
I wanted to get a very lightweight/packable pack for traveling and Osprey Daylite fits the bill perfectly. As with anything Osprey, this pack is well made and purpose-built. It has just the right number of pockets to allow for light travel and is compact enough to fit in my luggage for an overseas trip. A small water bottle will fit inside but it is really not built for that.
There are no reviews that match your criteria. Would you like to
reset filters?