Your Browser is OutdatedDave from United States, OK Public Profile
Reviews by Dave
Not Worth the money.
Written on Feb 19, 2025
For 30 almost 40 bucks after shipping, it feels like it should be 15 or 20. The over all metal quality feels fine, but the dials are absolutely horrible. Have to use a cartridge to flip between the two peep sights, otherwise it's next to impossible to get them to flip. I should have just sprung for the much more expensive Areo Precision or even the UTG one. Best to avoid this one.
This thing is a no-go if you have the Magpul B.A.D. Lever
Written on Nov 03, 2024
Review for
Strike Industries AMBI Magazine Release
Mags are falling out when letting the bolt slam home. Incompatible with the Magpul B.A.D. Lever. There's no "wall" or click when pushing mags in, and it is easy to over insert that magazine. Haven't taken it to the range, and I don't trust it enough to do so.
Great Handguard for an old 500
Written on Jul 23, 2024
This is miles ahead of the stock corn cob type handguard that came with my Mossberg 500. The texture is good, but not as good as it could be. The MLOK slots are a nice touch, meaning you can mount practically anything you want, to your shotgun. Light weight, and feels very solid.
Nice stock adapter.
Written on May 23, 2024
Review for
Mesa Tactical LEO Gen II Tele Stock Adapter
Very nice stock adapter. Fit on my old Mossberg 500 right out of the box. Has worked fine with every AR stock tube I've thrown on it. Best part is it's made out of metal, unlike other stock adapters out there. The QD sling attachments are a nice bonus.
Nice stock adapter.
Written on May 23, 2024
Review for
Mesa Tactical LEO Gen II Tele Stock Adapter
Very nice stock adapter. Fit on my old Mossberg 500 right out of the box. Has worked fine with every AR stock tube I've thrown on it. Best part is it's made out of metal, unlike other stock adapters out there. The QD sling attachments are a nice bonus.
Abysmal to install.
Written on May 23, 2024
An ABSOLUTE pain to install. The tolerances are out of spec, I honestly expected better for what I paid for it. It's also to stiff to move up and down the tube smoothly, so you constantly miss the mark for the position you want it in. The release mechanism to slide it off the tube is ABSOLUTELY terrible. You simply can't pull down on the release lever, you have to jam something in, and pull the pin down, keep what ever you jammed in it, in place, and THEN slide it off the already out of spec tube.
0 of 1 found the following review helpful.
Update to my last review.
Written on May 22, 2024
After having owned this sight for a while, I ended up not being completely satisfied with it. It;s eye relief is extremely close, and is a very poor choice for an AK platform as there doesn't seem to be any after market mounts that truly bring the sight further towards the rear of the gun. After fooling with it for a bit, I decided to look elsewhere for an optic.
Great fit for an old 500
Written on Nov 22, 2023
Review for
ATI Outdoors Classic Shotgun Heatshield
I got this cause I seen the display photo of the same gun, upon which I wanted to put it on. It came in quickly, and installed without much issue. However if you're not careful it can scratch your gun finish. One thing to make sure of to keep this from sliding forward each shot, is to make sure that the heatshield mounts against the rear of your magazine tube barrel lug.
Tube is Tube
Written on Oct 23, 2023
Review for
Tdi Arms M16/M4 MIL-Spec Buffer Tubes
Seems fairly solid and light weight. My spare AR stock I wanted to use with it, fits fairly tight with little play. Installing it was straight forward, HOWEVER mind DID NOT come with the end plate pictured in the listing, which is fine for me since I didn't need it. I needed just the tube and castle nut, which luckily did come with the buffer tube. I used this with the Mesa Tactical stock adapter which came with its own end plate. With all that said, the tube just very barely seems ever so slightly out of spec in the threaded area. That may very from individual fire arms, it may fit tighter, or looser.
Great grip.
Written on Oct 17, 2023
The usual Hogue quality. Fits great on a stock adapter for a mossberg 500. I even test fit it on an Smith and Wesson M&P 15. The rubber texture works great and stays true even when damp, and wearing gloves. Highly suggest this product.
There are no reviews that match your criteria. Would you like to
reset filters?