David from United States, CO Public Profile

I picked up 2 2.5-10 Barrages to replace one that I have been super-gluing back together for about 2 years now. I simply replaced the old one with the first new one sent the target to 25 yards and had a 5 shot group that was less than an inch but low and left. Took the target out to 50yrds and still had a tight group but was 2 inches low and 3 inches left. With the 1/2 moa per click I went up 4 right 6 (50yrds doubles adjustment that would be use at 100) and I've no idea where the round went as the paper was untouched (12x12 grid on a 16x18 paper) fired one more and still missed paper. Returning the adjustment to original setting fired 5 rounds and the group was everywhere(about 10 inches)centering low and left. I think the reticle has come loose internally. Changing to the second scope I find it to have a laser (ff13065) not a big deal as my original also had a laser. Sent the target out to 50yds and did not hit the paper. I then turned on the laser set it on the target ignoring the scope and had a solid 1" high 4" right. I then adjusted the reticle to match the laser fired one shot and hit an x, turned the laser off fired 4 more gave me a group of 6.5 inches heavy to the left. I am very disappointed in both scopes with there inability to hold a setting but on the positive side the laser is quite accurate if you use the 10x and ignore the reticle floating around it. I still have to try the other scopes from my order but it looks like this product is a bust necessitating