Written on Jul 22, 2016
Works well to clean inside the brass and primer pockets. For best results, I like to run my brass in the tumbler overnight after the sonic cleaning. This will get the brass clean but it's still kind of dull. If you want your cases to shine better than new, use this and the tumbler.
1 of 1 found the following review helpful.
Written on Nov 26, 2015
These fit very nicely on AR style rifles. I have a similar base for a Remington 700. With these rings it does limit your options for a bolt action. The attachment screws in my opinion should have been on the left side.
0 of 0 found the following review helpful.
Written on Oct 09, 2015
This item is made for the Hornady progressive press. If you have a single stage press this device will not work. The unit comes with 4 primer tubes, not two as pictured. The outside diameter of the tubes is larger than what goes in the single stage press. If you have a lathe I imagine it would work. The end with the cottor pin would need to be turned down. If you already have the single stage feeding, look at the tubes you'll see what I mean. I called Hornady and confirmed. So buyer beware. Opticsplanet has agreed to rma for free. So great service from them, Hornady does also but I think it should be listed, that's why I am writing this review.
1 of 3 found the following review helpful.
Written on Oct 04, 2015
Very easy to install and adjust. I was up and running in minutes. I first attached the bolt that comes with the product, but didn't tighten it down. Raised the ram to its full height, placed the feeder tube in the unit, then looked straight down that tube so that I could see the primer cup on the press, the two items will align. Then tighten the bolt with the included wrench. So when you send your brass into the resizing die, a primer will drop in the cup, when you lower the ram, the primer will seat, repeat. If you do need help, call Hornady. They really do have excellent customer service.
0 of 0 found the following review helpful.
Written on Sep 27, 2015
Adjust your front A1 / A2 rifle sight. Works as advertised. Fits easily in my Plano range box. Seems very durable and makes sight adjustment a snap. Bought to adjust the front sight of a custom build.
0 of 0 found the following review helpful.
Written on Sep 10, 2015
It works as advertised, screws on easy, blocks the sun on sunny days. I also have the Leupold screw on lens caps. The lens caps screw on the shade just as easy. The shade is also light, much lighter than the one I have from Burris.
0 of 0 found the following review helpful.
Written on Sep 08, 2015
This is a very nice trigger. Comes with two springs, one rated at 4.5 lbs. and another at 6.5 lbs. A nice upgrade over the standard AR trigger. This is my second ALG trigger, both used in custom builds. It's basically a mil spec trigger with a trigger job.
3 of 3 found the following review helpful.
Written on Apr 03, 2015
It's Plano, so if you fish you probably have a good idea of what to expect already. It's larger than any tackle box I own, my large Vanguard Endeavor 80mm spotting scope with tripod attached fits nicely in the bottom. I also carry tools and accessories I need for the range. So hearing protection, safety glasses, bore snakes, gun oil etc. Very nice to have all those things just ready to go. Wish I had got one sooner.
4 of 4 found the following review helpful.
Written on Apr 03, 2015
Seems to be a pretty good scope. The glass is clear, adjustments have a good positive click. Was a good price with the included mount. Purchased so that I could easily remove and attach to other rifles I own.
0 of 0 found the following review helpful.
Written on Mar 11, 2015
Picked this up to use on my swivel stud rifles. One bidpod then buy the adapter only and you can switch to all your rifles in seconds. I've used on everything from .223 to .300 Win Mag. So far no issues, mostly bench rest shooting.
1 of 1 found the following review helpful.