Your Browser is OutdatedDENNIS D from United States, NM Public Profile
Reviews by DENNIS D
Outstanding performance!
Written on Mar 01, 2021
Review for
HIPERFIRE HIPERTOUCH 24 Competition AR Fire-Control Group w/Straight Trigger, 2.5/3.5lb Pull Weight
Absolutely no creep. Break is like the proverbial "glass rod". Less than 0.5mm overtravel. I can adjust the break between 17.5oz. and 3lbs.14.9oz. by changing by changing the included hammer springs and raising/lowering the finger pad.
The lighter than stated pull weight is a bonus, since all of my guns break at 2 1/4lbs +- 3oz.
This is the perfect trigger for me! And I've tried 9 other brands and models.
The lighter than stated pull weight is a bonus, since all of my guns break at 2 1/4lbs +- 3oz.
This is the perfect trigger for me! And I've tried 9 other brands and models.
3 of 3 found the following review helpful.
Has over 4mm 1/8" creep.
Written on Feb 03, 2021
It also has too much overtravel. My Lyman Digital Trigger Scale shows pulls ranging from 1lb 13oz to 2lbs 6oz. .
Bought the Competition model. Absolutely no takeup or creep, glass rod let-off, no overtravel, and the pull varies less than three oz on a brand new trigger! I expect the break will vary less than two oz after a few hundred break-in pulls using the Delrin Hammer Drop tool that mounts using the front takedown pin.
I'll update the reviews on both triggers after break-in.
Bought the Competition model. Absolutely no takeup or creep, glass rod let-off, no overtravel, and the pull varies less than three oz on a brand new trigger! I expect the break will vary less than two oz after a few hundred break-in pulls using the Delrin Hammer Drop tool that mounts using the front takedown pin.
I'll update the reviews on both triggers after break-in.
2 of 5 found the following review helpful.
Excellent Product!
Written on Jan 04, 2021
Got the right one this time... It is as well made as any optical product I've seen. Mounted solid as vault. It was quick and easy to zero to my 1-10x LPVO by 1) mounting my AR in my Tipton top of the line weapon mount, 2) aiming my green aiming laser at my 100yd reflective target, 3) screwing in the doubler, and 4) adjusting the doubler to align the laser dot to the reticle.
It took less than 4 minutes from start to finish, including a 5-shot group to confirm!
I did the same procedure on my 10-22 with excellent results.
Both rifles now have either 1-10x or 2-20x with a few turns of the front section of the doubler!
NIICE!
And return to zero is spot on!
It took less than 4 minutes from start to finish, including a 5-shot group to confirm!
I did the same procedure on my 10-22 with excellent results.
Both rifles now have either 1-10x or 2-20x with a few turns of the front section of the doubler!
NIICE!
And return to zero is spot on!
15 of 16 found the following review helpful.
MEH! Does not have all the features that I want!
Written on Dec 19, 2020
Very smooth but LONNGG PULL. Over 1/8 inch of creep before hammer falls. Lots of unadjustable overtravel. Tactile, but loud and long, reset.
I might be able to install a long setscrew in the trigger guard for the overtravel, but this should have been taken into consideration by the manufacturer.
The creep might be reduced by reducing the sear engagement, BUT that could reduce the safety of the trigger unit as a whole! AND it will certainly void the Hyperfire warranty and product liability! THEREFORE, I WILL NOT MODIFY ANY PART OF THE Hyperfire MECHANISM!
I will return the I product and try to find something that has all the features want.
Sounds expensive... But safety is a requirement!
I might be able to install a long setscrew in the trigger guard for the overtravel, but this should have been taken into consideration by the manufacturer.
The creep might be reduced by reducing the sear engagement, BUT that could reduce the safety of the trigger unit as a whole! AND it will certainly void the Hyperfire warranty and product liability! THEREFORE, I WILL NOT MODIFY ANY PART OF THE Hyperfire MECHANISM!
I will return the I product and try to find something that has all the features want.
Sounds expensive... But safety is a requirement!
2 of 5 found the following review helpful.
Wrong item recieved.
Written on Nov 19, 2020
I ordered an Enhancer with the 1inch/30mm adaptor. Received one with the 34mm adaptor.
Looks very well made, but I don't have a scope with a 34mm tube.
I'll do a full review when I can mount it.
Sending this one back to get one with the 1inch/30mm adapter. I have two 1-8x 30mm LPVO scopes.
Thanks in advance for your help!
Looks very well made, but I don't have a scope with a 34mm tube.
I'll do a full review when I can mount it.
Sending this one back to get one with the 1inch/30mm adapter. I have two 1-8x 30mm LPVO scopes.
Thanks in advance for your help!
1 of 14 found the following review helpful.
There are no reviews that match your criteria. Would you like to
reset filters?