Drew from United States, MI Public Profile

I really like Kinetic products. They are very well made,high quality. I purchased this one to mount an Aimpiont COMP M4s. There are 2 part's the mount and the mounting bracket. I didn't care for that too much I would have rather had a 1 piece mount. So the mounting bracket attaches to the Aimpiont with 2 screws. It's a solid attachment. The assembly then attaches with 4 tiny little screws,oh I forgot to mention these screws should be installed prior to attaching the mounting bracket because you won't be able to once the bracket is installed. There isn't enough room between the bracket and the Aimpiont. This is a little bit tedious if you are installing a COMP M4s because the battery is on the bottom of the Aimpiont. It comes with a 1/16 Allen wrench which has been made specially for this install. The short end of the wrench has been been shortend by half so that you can get it in between the Aimpiont and the battery. Then you can only turn the screw about a quarter turn at a time. It's tricky getting the wrench in the head of the screw it takes patience but it can be done. Be careful not to strip it. Once it was assembled I would say it seems very solid. It goes on the weapon easy. You just line it up where you want it on rail and roll it on. It makes an audible click when it's installed correctly. If it doesn't click it's not attached correctly. I had an issue with my BCM handguard/rail. There is a little piece that goes between the handguard and the upper receiver to keep i

Hi quality well made construction. When the leg's are fully extended I can keep a 30 round mag in my AR with the but stock fully extended without the magazine touching the ground on a flat surface. There are no external springs to worry about. It's all push button to lock in position. You can stow the leg's forward or back if you want. The throw Lever is nice to switch between weapons quickly or to just remove if you don't want to shoot with it on. It's not small it's pretty beefy the pictures on line don't really give a clear picture of the size of it. They should include a picture of it on some different weapons to give you an idea of the size. I'm sure that I could have found some online if I looked around. That being said it's not to big. It's perfect for what I wanted it for at the range for target shooting. Made in America! Great quality product well made tuff construction. I would highly recommend it. Thank you.