Your Browser is OutdatedReviews by Gbenz
Nice End Plate
Written on Jul 21, 2024
Not much to say. I wanted an end plate with a QD socket. I didn't want to spend a lot of money. This installed just like it should and has functioned fine ever since. Nothing special. Does for what it is designed.
Great Jigs
Written on Jul 21, 2024
Review for
SLR Dimpling Jig Gas Block
I purchased a jig in each size available. They are great. They are spot on. The allen screw has a nice point that fits right into the gas hole in the barrel. The other allen screw on the other side is a perfect guide for the drill bit to dimple the barrel. It can be hard to see the dimple while you are drilling because of how thick the jigs are. Just take care not to drill too deep when you are only trying to dimple.
Great Handguard
Written on Jul 21, 2024
I installed this handguard on an Aero Precision M5 upper. The anti-rotation pins fit very snuggly against the rail on the M5. The attachment nut for the handguard has a post that fits into the groove in the barrel nut. The screws and the nut plate have to be completely removed in order for the handguard to come off of the barrel nut. Extremely well crafted and engineered. I have absolutely no concerns about this handguard coming loose, turning, or falling off at all. Very happy with this purchase. Perfect length for the 12" Faxon barrel I am using.
Great Handguard
Written on Jul 21, 2024
I installed this handguard on an Aero Precision M5 upper. The anti-rotation pins fit very snuggly against the rail on the M5. The attachment nut for the handguard has a post that fits into the groove in the barrel nut. The screws and the nut plate have to be completely removed in order for the handguard to come off of the barrel nut. Extremely well crafted and engineered. I have absolutely no concerns about this handguard coming loose, turning, or falling off at all. Very happy with this purchase. Perfect length for the 12" Faxon barrel I am using.
Buffer Tube
Written on Jul 21, 2024
Review for
Tiger Rock AR-15 Mil Spec Stock Buffer Tube
I needed a buffer tube that didn't stick out around the buffer retaining pin because I am using a SCS that has a larger buffer retaining pin. This fits the bill. Attaches to lower nicely, stock/brace goes on nicely and slides back and forth easily, and castle nut and end plate attach well. It all came together like it should. Has functioned properly since installation. No complaints.
There are no reviews that match your criteria. Would you like to
reset filters?