Your Browser is OutdatedReviews by Gunshy
Greatest thing since John Browning
Written on Feb 17, 2024
Review for
Real Avid 1911 Smart Wrench
This thing is a must, especially if you have a 1911 with a threaded barrel. No more launching springs and end caps into orbit. Wish i would've bought it sooner since it is cheaper than the replacement parts when it happens. And it will happen.
Must have for the LNL
Written on Feb 06, 2024
Review for
Hornady Lock-N-Load Die Bushing 3-Pack
These are great for quick change setup, set the die height, tighten down the lock ring and screw and forget about it. Can be stored installed in the die box. The only downside is they get expensive when you have to equip multiple different die sets.
Makes Swaging Quick
Written on Feb 04, 2024
Review for
Hornady LNL AP Primer Pocket Swage Tools
I used this to swage about 1,000 pieces of brass last weekend. It only took about 10 minutes to set up total and i was able to run the brass in about an hour and a half.
If you get a piece of clear tubing that's about four feet long you can make an ejection tube that really speeds things up. Just attach it to the top of the ejection die with a hose clamp and just keep pulling the handle.
If you get a piece of clear tubing that's about four feet long you can make an ejection tube that really speeds things up. Just attach it to the top of the ejection die with a hose clamp and just keep pulling the handle.
Zero complaints
Written on Oct 23, 2023
I bought a box of 50 and wish I could've gotten more! This stuff is fantastic and at a respectable price. I have bought lower quality ammo at a higher price than this. If you're on the fence, don't be.
Perfect for my 44
Written on Feb 23, 2022
Review for
Henry Repeating Arms Co Receiver Picatinny-Style Scope Mount For Big Boy 2nd Gen Rifles BB-RSMP
Installation was super simple, remove factory screws, put rail on, put screws in, torque to spec. Mounted a tango MSR and hit the range. Mount held up perfectly fine even under recoil. Overall I'm happy with it, but a word to the wise, this mount has a bit of rise to it and needs to be taken into consideration when choosing rings.
3 of 3 found the following review helpful.
Mount for model 70
Written on Feb 06, 2022
These things are rock solid. A bit different to work with due to how they install, but they worked out in the end. I didn't have any tools to install them so I used a piece of 1" dowel to install them, it worked.
0 of 1 found the following review helpful.
Big upgrade over factory stock
Written on Feb 04, 2022
This thing is awesome, fits right on the back of my carbine. Aesthetically better than the OEM stock and it's a fair bit more functional as well. When flipped to the side it does cover the bolt pretty well though.
Very easy to recess into handguard.
Written on Jan 09, 2022
Review for
KAK Slim Extended 5/8-24 Flash Can
I had a 300 blk with an 8" barrel. I also only had a 12" rail. This fit nicely inside the handguard and brought the end of the device 1" past the end of the handguard. Was also very easy to install and easy to clean.
1 of 1 found the following review helpful.
How to make friends at the range.
Written on Apr 21, 2021
Review for
KAK 1/2-28 Flash Can
This thing is great! Is your gun range crowded? Get this and you'll get the space you need. It makes it less ear violent for the shooter, but not so much for bystanders. I put this on the end of a 7.5" barrel and it makes all the difference. No more concussive blast.
1 of 2 found the following review helpful.
Tames my Model 69
Written on Apr 20, 2021
This thing is a must have if you have a model 69. Turns it into a while new beast. For me it increased control because I have hot dog fingers. Easy to swap out with factory grip, it's so good I ordered another for my 686.
There are no reviews that match your criteria. Would you like to
reset filters?