Henny from United States, NC Public Profile

$300+ for a used product package, missing screw, and the on/off/momentary switch is stuck, takes 3x a trigger pull to manipulate it. I’ve been wanting an X300 variant for a year now and finally “pulled the trigger”, the box arrived obviously previously opened, the selector switch takes 10psi to move, and no such thing as momentary/strobe. 1/10 what I expected.

I installed this pressure switch attached to a Streamlight TLR-2 HL-g. With the TLR-2 HL-g, there are 3 setting on the physical light for light, laser, and light + laser.
This attachment pressure pad only utilizes the forward switch, not the rear with the 2nd plug in not being used.
The forward switch works 100% with the WML set on laser. If set on light, you only get your full lumens with 30+ PSI of force on the pressure switch. The average force on the pressure switch will only yield about 60% of the lights output, and you can “feel” this in the switch with adjusted pressure. As for the light + laser setting on the WML, the light comes on but the laser is completely absent, no matter what setting or pressure applied. If you manually set the light to constant light + laser it works. Point being, this pressure switch attachment does about 50% of what is desired. Also you have to buy an attachment to a streamlight WML just to run it on an AR. Would not buy this product again.