Reviews by J B
Stripped Upper
Written on Sep 19, 2025
Review for
Fostech Tech-15 Stripped Upper Reciever
QC might have missed this one as some parts of the upper had thicker coating.
Could not get the Charging Handle, BCG, and Barrel in due to tight fitting.
Had to sand the inside of this upper to get the Charging Handle, BCG, and Barrel in smoothly.
Also had to sand the holes for the Take Down pin and the Pivot pin so that it goes in smoothly.
After a little dusting and cleaning, I got the upper working as intended and greased up inside.
The parts are installed and moving how it should be.
Could not get the Charging Handle, BCG, and Barrel in due to tight fitting.
Had to sand the inside of this upper to get the Charging Handle, BCG, and Barrel in smoothly.
Also had to sand the holes for the Take Down pin and the Pivot pin so that it goes in smoothly.
After a little dusting and cleaning, I got the upper working as intended and greased up inside.
The parts are installed and moving how it should be.
0 of 0 found the following review helpful.
Awesome Gripod
Written on Jul 31, 2025
Need a vertical foregrip, you get one. Need a bipod, you get one as well. It's two in one. Solid and well made.
0 of 0 found the following review helpful.
It's just another grip
Written on Jun 17, 2025
Review for
LaRue Tactical A-PEG AR Grip
Bought the grip beacuse it was cheap. The color is more of a sandtone than an FDE. It matches with Andersen windows sandtone color. Had to do some modification by shaving and sanding it down a quarter of an inch of the contour. The grip contour was leaving a quarter inch gap into the lower receiver and safety. Overall, the grip is hard plastic, but well textured. It is a comfortable grip to hold.
1 of 1 found the following review helpful.
It's a gas block
Written on Oct 22, 2024
Great price.
Arrived quick and already assembled.
Ready to install.
Needed this for a 300 Blackout build.
Had to use a rubber mallet to get it to slide down into the gas slot, tight squeeze.
Other than that, it does what it is supposed to do.
Arrived quick and already assembled.
Ready to install.
Needed this for a 300 Blackout build.
Had to use a rubber mallet to get it to slide down into the gas slot, tight squeeze.
Other than that, it does what it is supposed to do.
0 of 0 found the following review helpful.
Close enough to the Edge
Written on Oct 17, 2024
Review for
Patriot Optics Edge 1-4x20mm Rifle Scope
Arrived quick and have it mounted on my 300 blackout Frankenstein (diffrent brands) build.
Sturdy optics.
It has an etched bullet drop compensation rangefinder reticle that can be illuminated by 5 levels of brightness and with the choice of red or green color.
Glass is clear, good eye relief, and good for short to mid-range.
This is a great with in the budget friendly optic.
Sturdy optics.
It has an etched bullet drop compensation rangefinder reticle that can be illuminated by 5 levels of brightness and with the choice of red or green color.
Glass is clear, good eye relief, and good for short to mid-range.
This is a great with in the budget friendly optic.
0 of 0 found the following review helpful.
Recommend for 22s or Airsoft
Written on Sep 30, 2024
Review for
VictOptics 1x30mm Red Dot Sight
Does not hold zero.
Tried on on 3(.223, 5.56, and .300 blackout) different rifles.
Best used for a .22 rifle or airsoft.
Tried on on 3(.223, 5.56, and .300 blackout) different rifles.
Best used for a .22 rifle or airsoft.
1 of 2 found the following review helpful.
Cool looking stock
Written on Sep 15, 2024
Review for
HERA Arms CQR AR-15 Stock System
The is a fixed stock. Looks great when installed along with the CQR grip. Looks even better with an SBR and if you're going for the space gun look.
Minus a star due to the little space to put the screw in and can end up stripping the thread or misalignment of the screw in securing it to the lower.
Minus a star due to the little space to put the screw in and can end up stripping the thread or misalignment of the screw in securing it to the lower.
0 of 0 found the following review helpful.
Awesome carry handle
Written on Sep 15, 2024
Review for
Vism BlastAR Carry Handle Mount
Great quality carry handle. Works great for an SBR with a 9" or 10" handguard. Great for space gun aesthetic too.
0 of 1 found the following review helpful.
There are no reviews that match your criteria. Would you like to
reset filters?