Marty from United States, CA Public Profile

The Geissele Super Gas Block Nitride Coated part number 05-807N is the newest version of their super gas blocks, is the only gas block Geissele sells directly. This LPGB has a lower profile than their 1st generation super gas blocks. This super low profile gas block will fit under all Geissele SMR rails. I purchased for a custom FNH upper build and fits snuggly under a 5.56 Cold Hammer Forged Mid-Length Barrel - Hybrid Fluted - 16" I prefer the black nitride coated version as it is more durable and matches black barrels better. This is a high quality Geissele low profile gas block and comes with detailed instructions, set screws, and pinning roll pin. The bore of the SGB is machined to closely fit around .750” diameter mounting bosses found on most M4 Carbines and AR-15 rifles. Highly recommend!

I purchased Vial for Spuhr Unimount. The white vial that came with the mount wasn’t quite as visible as the green one. It was easy to replace and works great. Took to range and fired approximately 500 rounds of M193 with no issues.

I purchased this scope cover for an Elcan Specter 1X/4X 5.56 rifle scope 2018 model with ARD and and object and ocular scope cover. The cover came in thick 6mm material that fit snugly on the scope and looks great. Optics planet was the only place that had it in stock and at a significant discount. I’m very happy with this purchase and help keep the scope from being scratched or nicked while in safe.

I purchased this Scopecoat cover for a EXPS3-0 and G33 magnifier combination in dark earth. The fit is great and very snug, covers both items completely. The only thing I wish regarding this scopecover is that they would make it in the XP-6 6mm version rather than the 3mm version as the XP-6 provides better protection. That aside, I am very happy with this purchase and also previously purchased the black version. Optics Plant has the best selection of Scopecoat covers at the best prices bar none, and at 17% off for this one. As another reviewer previously pointed out, the photo depicted for this set-up is wrong but he description is correct.

This is the second Transparent Jellyfish Cover that I have purchased. They fit great and snap on pretty tightly to the Trijicon Ruggedized Miniature Reflex red dot sights. I have used these on the Trijicon Ruggedized Miniature Reflex sights RMR RM06's and RMR RM07's. I primary use them to protect the RMR's while being transported to and from the range and keep them on in my safe. Although they are translucent you cannot see clearly through them while shooting. Great product for protecting expensive Trijicon red dot sights.

I purchased one of these ARD's for a Mark 4 MR/T 2.5-8X26, M2, Ill, Model 112633, scope that will go mon MK12 Mod 0 build.The objective lense on these scopes are threaded, but the photo here on OP depicts the ARD as being a snap-on/push-on type ARD. The MPN I purchased for my particular scope was 62875 (36mm). When it arrived it was the correct threaded version. Once screwed on you have approximately 1" that is added to the objective end of the scope. These ARD's do come in a grayish black color that maybe discolored in some sections. However, once you put your flip up cover on (if you choose to) only 1/2" is exposed. The objective flip up cover will be loose and come off easily. What I did was cut 6 1/4"X1/4" strips of black electrical tape and layered them in 3 sections on the end of the ARD then slid my Leupold objective flip cap on and its very tight. If you want it even tighter you add another layer to the 3 sections. With this improvisation the flip cap stays on very tight, will screw the ARD off if you start turning it and I'm still able to utilize my OEM objective flip cap effectively. For me the ARD serves two purposes: 1. it serves its intended purpose as an ARD and as a 1" sunshade (looks cool too). It does add 1" to the end of the scope, so if you purchase a Leupold scope cover get the large model 57868 (larger) instead off the medium 57866. The medium scope cover fits very tight with an ARD and its a pain to get off and on. Leupold makes great scope covers that a

I purchased this Scopecoat XP-6 scope cover to place on Trijicon Acog 4x32 TA31 RCO M150 with a mounted RMR. The cover fit very well with a nice tight fit. This cover is 6 mm thick so protects optics very well from scratches and dings in a crowded gun safe. Moreover, Optics Planet was the only dealer that had it in stock and received a great price. I highly recommend this scope cover.

Purchased this Voodoo Tactical padded weapons bag for a PRI SPR Mod 0 build with 18" barrel and A2 fixed stock and to go with a Voodoo Tactical Range bag in same color. Voodoo Tactical bags are made very well and are rugged with plenty of outer and inner pockets to carry plenty of magazines and range equipment. Will be purchasing a Voodoo Tactical 46" bag for bolt action rifle next. Voodoo tactical weapons cases are my preferred range bags. In addition, I received the best price here at Optics Planet. Very happy with purchase and highly recommend.

I purchased this Vortex Sure-Fit Riflescope Cover SF-L for a Vortex Viper PST 6-24X50 FFP MOA reticle. The cover fits nice and tight and protects the scope from being scratched. Best price at Optics Planet.

I installed two of these, one on a Remington 870 Express Tactical 12ga. and another on a Remington 11-87 Police Semi-Auto 12ga. These are upgrades to the cheap Remington plastic followers. They are well made and easy visible on an empty tube. Great price at OP. I highly recommend these upgrades.