Your Browser is OutdatedNate from United States, KY Public Profile
Reviews by Nate
Rail mount bubble level
Written on Aug 24, 2020
Great looking product and work great. Extremely hand how it flips up out of the way when you don’t need to use it.
Extreme down side and may this is a 1 in 1 million chance but the level side was not installed correct from the company. This caused the level side to drop way past the level point. I had to remove the roll pin and flip the level over to get it to work properly. After that it works prefect.
Extreme down side and may this is a 1 in 1 million chance but the level side was not installed correct from the company. This caused the level side to drop way past the level point. I had to remove the roll pin and flip the level over to get it to work properly. After that it works prefect.
muzzle brake
Written on Aug 24, 2020
Review for
Sniper Muzzle Brakes/Recoil Compensators
Fair condition. Had a few spot in the coating. Came with a crush washer and the jam nut but that jam but wouldn’t thread on to my barrel but the brake would. Couldn’t get the brake to clock right with the crush washer so after a couple hours of slowly removing material I finally got it right with no name but or crush washer.
1 of 4 found the following review helpful.
RS-50 Sunshade
Written on Feb 26, 2020
Review for
Riton Optics RS-50 Sunshade
When I ordered this item I didn’t not read the whole description. This sunshade is advertised as 1.8in in length on OP and on Riton’s site.
I was somewhat worried because the picture of the product shows a 4in sunshade.
Today it arrived and I was pleasantly surprised when I opened the box. This sunshade is 4in in length like the picture shows and it fits perfect in my Riton X3 Conquer 6-24x50.
I was somewhat worried because the picture of the product shows a 4in sunshade.
Today it arrived and I was pleasantly surprised when I opened the box. This sunshade is 4in in length like the picture shows and it fits perfect in my Riton X3 Conquer 6-24x50.
4 of 4 found the following review helpful.
Riton X3 Conquer
Written on Feb 18, 2020
This is a great quality optic. Great glass and the turrets clicks are very positive and the reticle is amazing.
The only complaint I really have is the eye relief distance is only 3.3 inches.
In the box you get the optic with front and rear flip up caps already installed, the Riton promise card, 2 hex keys to reset the zero on the turrets and to lock down the zero stop, a Riton Sticker, cleaning rag with the Riton logo.
Does not come with any kind of manuals but you can find them on Riton’s website as a PDF.
The only complaint I really have is the eye relief distance is only 3.3 inches.
In the box you get the optic with front and rear flip up caps already installed, the Riton promise card, 2 hex keys to reset the zero on the turrets and to lock down the zero stop, a Riton Sticker, cleaning rag with the Riton logo.
Does not come with any kind of manuals but you can find them on Riton’s website as a PDF.
3 of 3 found the following review helpful.
Nylon coated cleaning rod.
Written on Feb 18, 2020
Review for
J. Dewey Nylon Coated Cleaning Rods
This cleaning rod works great. It’s made it so much easier to clean my rifles not to mention quicker. The rod it’s self is sturdy.
I do wish that the handle was as a little longer.
Cleaning rod comes does come with a jag and make to female adapter for brush’s.
I do wish that the handle was as a little longer.
Cleaning rod comes does come with a jag and make to female adapter for brush’s.
2 of 2 found the following review helpful.
Lyman bore guide
Written on Feb 18, 2020
Review for
Lyman Universal Bore Guide Set
Bore guide works great and fits a wide assortment of calibers and rifle styles.
** I use a one piece nylon coated cleaning rod. The first time is used it with the Lyman bore guide I found that the guide had a sharp edge in the ID on the tube. This cause the nylon to be shaved away from my cleaning rod and those shaving to be left inside the chamber and the barrel of my rifle. Might want to take a fine piece of sand paper and run about the inside edge trying to use the product. **
** I use a one piece nylon coated cleaning rod. The first time is used it with the Lyman bore guide I found that the guide had a sharp edge in the ID on the tube. This cause the nylon to be shaved away from my cleaning rod and those shaving to be left inside the chamber and the barrel of my rifle. Might want to take a fine piece of sand paper and run about the inside edge trying to use the product. **
2 of 2 found the following review helpful.
Parker Hale style jag.
Written on Feb 18, 2020
Review for
J. Dewey Parker Hale Weapon Cleaning Jags
Jag works great. Make it extremely easy to change out patches.
**Only issue I had with this product is the burrs left on a few of the barbs that were about 1/4 inch long. Had to remove them before using the jag.**
**Only issue I had with this product is the burrs left on a few of the barbs that were about 1/4 inch long. Had to remove them before using the jag.**
Great Rail
Written on Feb 10, 2020
Review for
Evolution Gun Works Picatinny Scope Mount, Remington Model 541, Long Action Rifle Rail Mount
Received item in 4 days of placing the order.
The rail has a great weight and and fits well.
I did have 2 issues with this rail.
1.) it had a small raised spot on the rear seating area that had to be smoothed out.
2.) this is not a issue with the rail it’s self but I did have to bed the rear of the rail to keep it from torquing when mounting it.
The rail has a great weight and and fits well.
I did have 2 issues with this rail.
1.) it had a small raised spot on the rear seating area that had to be smoothed out.
2.) this is not a issue with the rail it’s self but I did have to bed the rear of the rail to keep it from torquing when mounting it.
There are no reviews that match your criteria. Would you like to
reset filters?