J. Ayala from United States, NY Public Profile

I recently purchased this product (ie) June 2026 after doing some research & trying to decide which stock would be best for my application. The build quality, craftsmanship, materials, & overall craftsmanship is great. After reading some instructions & watching a video or two I made the installation of the upper receiver into the stock. I'll admit that the trigger group was definitely a challenge & not that easy to install. I had to use a Nylon block to flex the section where the trigger group is placed because I didn't want to sand or cut anything. The end result was a beautiful looking Ruger Mini 14 in 5.56 Cal. I'm very content with this project & how it turned out. I took it to the range one week later & had the rifle Zeroed with a Primary Arms PLX-C 1-8x24 Lpvo. I did noticed a better level of performance in the rifle & my groups where much tighter than with the original stock. All the 5, 10, & 20 capacity magazines fit into the magazine weld with no issues. I would definitely recommend this product for anyone looking to upgrade their Mini-14.

I recently purchased this product (ie)April 26K for a project I've been working on. The build quality, craftsmanship, materials used, & construction are great. This ELR-Extended Eye Relief rifle scope is intended for a scout configuration. I installed the Hi-Lux Mk2 optic on my Ruger American Gen. 2 Scout Rifle chambered in. 308 Caliber & took it to my local outdoor range. To my surprise I zeroed the rifle within 6 shots @ 100 yards using Federal Power-Shok, 150 grains ammo. The Hi-Lux Mk2 optic also has a fiber optic redical & BDC-Buller Drop Compensator which is excellent for longer distance shots. I definitely recommend this Optic especially if you're using it for its intended purpose. A+++++ in my personal opinion.

I recently purchased this product for a project I've been working on. I was at my local him store in early February 26K looking for the older Ruger American Scout Rifle Model M77 which I had seen used for around $600 but I didn't purchase it at that time. When I returned in early March 26K, that rifle I was looking for was sold so I was back to square one. Little did I know that there was the new Ruger American Gen 2 Scout Rifle chambered in .308 just resting in a gun rack waiting for me. When I picked it up I fell in love with it & I then knew this was meant to be so for just a little more money I made the purchase. After a week I went to my local outdoor range to test it out in it's original configuration, which was nice however I expected a bit more accuracy. After some research & reading many reviews I decided to purchase the MDT Field Stock Chassis for my Ruger Scout Rifle. Upon arrival of the MDT Chassis I read & followed the installation process which was fairly reasonable & straight forward. I went back to the range on March 26, 26K & put the Ruger American Gen 2 Rifle to the test. Ok so here's what I discovered. There is a significant difference in accuracy with the rifle in the MDT Field Stock Chassis. My groups where much tighter & the chassis is very stiff & allows the barrel to free float without compromise. I am extremely content with this MDT Chassis & I definitely recommend it for the price, which also proves that you don't need to spend crazy dollars to get a

I recently purchased this product ie January (2026K)& it was the perfect addition to a project I've been putting together little by little. It is a small hand stem which is perfect for my hands. The construction, feel, & quality are just what I was looking for. The M-Lok attachments are strong & easy to install on any M-Lok Rail system. It's not necessary to over pay for this type of gear because this one is extremely durable & I would definitely purchase another for future projects.

I recently purchased this product for a project I've been working on. I've been looking into different types of grips to put on my Henry Model X, Lever Action Rifle chambered in .44 Magnum. After installing the action into a Ranger Point Percision Chassis there are so many options. This grip is light weight & made of a Polymer material which is nice & very comfortable on the hands. I totally recommend it.

I recently purchased this product ie December (2025K) after seeing it being used to mount an optic at my local range. Yesterday I received an optic that I ordered & gave the Fix It Sticks a try for myself. I can now say in my personal opinion, these are the best Gun Smith Tools I have ever used. The craftsmanship, & materials to make this is by far second to none. I'm so impressed that I'll be using it from now on & on all my future projects. There are many different options for these tools so if you're interested & in the market find one the works for your use. I totally recommend it.

I recently purchased this product ie (December 2025K)as an upgrade to the IWI X95 Tavor Bullpup Rifle. This is an incredible piece of ultra usable accessory. I am simply amazed at the build quality, construction, & materials used to make this product. The built in bipod is so impressive & how it's incorporated into the hand guard, This thing is stunning. There's a small round metal knob on the top front of the rail that when you turn it tightens or loosens the Cant position of the bipod. The barrel on my x95 is now completely free floating & the modularity of this unit is phenomenal. There are also Mlok slots on the (3,6,& 9 positions).. Five on the left & right & three on the bottom of the rail. I take my hat off to the people that designed this product & I totally, totally, recommend it. Yes it is pricey but in my personal opinion you're really getting something unique out of this product.

I recently purchased this product ie November 2025K for a project I've been working on. This item was placed into an Ultradyne UD5 Chassis & married to a CZ Varment .22 WMR Bolt Action Rifle. The craftsmanship, build quality & construction are exceptional. I also installed an MDT SRS-KITE FIXED Stock to this adapter & together they work perfectly. In my personal opinion I most definitely recommend this product. If you're looking to upgrade your(Pew, Pew)& want something much more effective than a Polymer or Wood Stock, give this units a try & I'm sure you won't be disappointed. A modular chassis is a total plus for precision shooting & you don't need a gunsmith to do the installation, you can do this Yourself with basic tools.

I recently purchased this product for a project I've been working on & I am happy to say this is an awesome replacement. This Buttsrock is rock solid in every form & it looks great. I placed it onto a Ultradyne UD5 Chassis after using the recommended adapter. All the connecting parts were married perfectly. This item is an utmost Percision piece of gear. My CZ WMR Varment Rifle now looks stunning & in my opinion better than the wooden stock.

I recently purchased this product ie November (2025K)& although I've read some negative reviews, I actually like this unit. It is robust, very ergonomic, well built, & it just works. In my opinion I do recommend this product to anyone who isn't afraid of something different than the norm. I'm really liking how I could use it on any Pic Rail, it's actually a great idea. The 1100 Lumes is crazy bright & there's a locking mechanism to prevent any accidental engagement.