Your Browser is OutdatedReviews by Tex0311
Great idea, poor execution.
Written on Jun 22, 2026
Review for
Heresy Design Silencer Timing Device
Timing is always a pain and these are supposed to make it easier. Unfortunately, the diameter of is too large which prevents you from getting a wrench on the muzzle device. Glad I only bought 2 sets...
0 of 2 found the following review helpful.
Super solid!
Written on Jun 09, 2026
Review for
Vltor Enhanced Modular Stock, Milspec
Most sliding stocks have a fair bit of play, which makes them unsuitable for shooting at ay decent distance. This stock is totally solid, there's no play at all when you're laying behind the gun shooting at distance.
Awesome adjustable block
Written on Jun 06, 2026
I have 3 of these. I bought the first and it performed so well I bought 2 more. This makes adjsting for suppressed & unsuppressed very easy in the field. It also comes with a set screw to lock it in 1 position (not possible in the field).
1 of 1 found the following review helpful.
Midgrade Charging handle
Written on Jun 06, 2026
I had higher hopes for this one. Typical aluminum body but the handles are polymer. I guess it's good in terms of weight but I thought it was all aluminum. It's definitely very tight in terms of tolerance. It doesn't disengage the latch as well as I'd like either. Hopefully it'll just take some break-in.
Light barrel shoots well
Written on Jun 06, 2026
I bought this barrel for an AR10 battle rifle build. I went with the pencil profile to try and save a little weight. This barrel shoot quite well for a pencil profile. The finish is great and the tolerances are spot on. Headspace is perfect, gas block surface is a tight .750dia. Threads are also tight. Great bbl for the price and weight.
Horrible QC!!!
Written on May 20, 2026
Review for
TRYBE Defense AR-10 Barrel, .308 Winchester
I am now the 2nd person to buy one of these barrels with bad headspace. The Go gauge is basically the same as the No Go gage in this barrel. I called Trybe twice and left messages with no call returned. I then sent an email again, no reponse. I called a third time and finally spoke to someone. Trybe and declined to replace the barrel and referred me to OP instead.
•Terrible product
•Terrible customer service!!
•Terrible product
•Terrible customer service!!
Reliability??
Written on Apr 23, 2026
I bought two of these and sold both..
Safe: works fine
Semi: The semi pull is absolutely TERRIBLE!! It's a metric F-ton of nasty creep on both triggers. One would not reliably drop the hammer. In fact, it only dropped the hammer about 50% of the time.
Forced (select fire): It worked fine.
The point is this. If you're buying it to go waste precious ammo, go for it. If you want a fire control system that allows you to shoot in SA and send accurate shots this isn't the one!
Safe: works fine
Semi: The semi pull is absolutely TERRIBLE!! It's a metric F-ton of nasty creep on both triggers. One would not reliably drop the hammer. In fact, it only dropped the hammer about 50% of the time.
Forced (select fire): It worked fine.
The point is this. If you're buying it to go waste precious ammo, go for it. If you want a fire control system that allows you to shoot in SA and send accurate shots this isn't the one!
1 of 6 found the following review helpful.
Creeeeeeeeeepy & Unreliable
Written on Apr 16, 2026
1: If you're a fud and just want to mash the trigger and qaste ammo, this will do.
2: If you want true select fire with reliable semi-auto, move along! The semi position has years of creep. Then once you get to the bottom it may or may not break and fire. I bought 2 and both are creepy AF and 1 is totally unreliable in the semi position.
3: I haven't done anything other than a function check on both and the forced reset appears to work properly. However, given my discovery above, I wouldn't count on it.
4: I've found out that other guys have had the same issues. Apparently, this is not a 1 or 2 off, it's a pattern.
2: If you want true select fire with reliable semi-auto, move along! The semi position has years of creep. Then once you get to the bottom it may or may not break and fire. I bought 2 and both are creepy AF and 1 is totally unreliable in the semi position.
3: I haven't done anything other than a function check on both and the forced reset appears to work properly. However, given my discovery above, I wouldn't count on it.
4: I've found out that other guys have had the same issues. Apparently, this is not a 1 or 2 off, it's a pattern.
3 of 4 found the following review helpful.
There are no reviews that match your criteria. Would you like to
reset filters?