Wang243 from United States, FL Public Profile

Why repeat all of the other 60 5 STAR reviews?
They are simply great rings to use to mount any scope!
The +/- inserts make it easy to almost zero the horizontal and vertical without make that adjustment with the scope dials.

These rings work great. They center on the rail and add as much moa as you need. You can not only gain or loss up to 40 moa of elevation by choosing the right combo of inserts but you can also adjust for unusal ring/mount/barrel alignments. By simple rotating the front or rear inserts (your choice) you can align the barrel and scope (a little trial and error in finding the correct combo). I also found the the 6 screws on the ring clamps make it easier to tighten without changing the scope level comparied to the 4 screw set up on the regular signature zee rings.
I personally like the idea of torx screws to attach the rings to the rail compared to the big nut sticking out the side to catch on.
Another plus is that the plastic inserts clamp the scope tightly without leaving rings marks on the scope barrel as Burris advertises

Considered a borescope for many years and then Lyman finally introduced an affordable one!! Their borescope works great, is easy to use, and has a capture feature via an included SD card to plug into computer for the big picture.
It is no Hawkeye but it does have good resolution and clarity with a easy to see display for the money.

I have three of the Vortex lo-pro levels because that are light weight and very slim (great for tight spots). I have found that they are not intrusive and very visible when mounted upside down to the rear of the scope.
Once mounted they can be left attached to the scope as a referance level if you have to move or readjust scope.

laser was useable in a matter of minutes. Took me a little time to figure out how to center the system on my aluminum tuner but once that was done it only took a few minutes to sight in my 22. Haven't used it again myself but a number of follow shooter at the range say they save tons of $$ on ammo with it.

Had a hard time making the decision between the K1050, the Nightforce and March scopes. All the reviews I could find on all of the scope were 4 and 5 stars with everyone mentioning the clarity being excellent on the scope that was being rated. I have had NFs BR scopes in the past and really like the scopes but never really got use to the small exit pupil at the max power setting, so I compared the specs on the exit pupil on all the scope and decided to try the Kahles.
I have now had the scope for a few month and I must say that I am very pleased with the purchase. I like the ease and repeatability of all the scope adjustments and really like the way Kahles has set up the parallax adjustment on these K1050s

Excellent value and clarity for the price when OpticPlants had these on sale!!
Compares to other more expensive brands that I have looked thru at the range.
The focusing is smooth and excellent with a very clear view even to 300 yards.
Nice carrying case though it could use additional padding.
Four Star plus ratings on a number of other sites.

These rings work great. They center on the rail and add as much moa as you need. You can not only gain or loss up to 40 moa of elevation by choosing the right combo of inserts but you can also adjust for unusal ring/mount/barrel alignments. By simple rotating the front or rear inserts (your choice) you can align the barrel and scope (a little trial and error in finding the correct combo). I also found the the 6 screws on the ring clamps make it easier to tighten without changing the scope level comparied to the 4 screw set up on the regular signature zee rings.
I personally like the idea of torx screws to attach the rings to the rail compared to the big nut sticking out the side to catch on.
Another plus is that the plastic inserts clamp the scope tightly without leaving rings marks on the scope barrel as Burris advertises
A few words of caution though, first these rings do not come with two sets of 0 inserts so if you do not wish to change your MOA angle you have to carefully install the two sets of +/- 20 MOA to achive 0 MOA.
Secondly check the ring height before you install them. I ordered the 1.25" height rings and received a well packaged and displayed set stating that height but once I got the scopes mounted I notice it was a LOT taller then I expected on the rifle. I like my scopes mounted high on my brenchrest rifles so I decided to try it and I decided to keep the 1.5" ring.

Well make and precision fit as the name indicates.

Lapping of the rings was not necessary for perfect alignment and fit of the scope.

My first purchase of Vortex rings though I have purchased their scope levels in the past.

Will definitely purchase these rings again in the near future!