Zachary Weaver from United States, TX Public Profile

The OD green finish matches magpul OD quite well.
The machining was good, no burs and everything up to spec. Fit in my receiver as it should. The small bolts that hold on the levers seem to be a quality metal and i was able to get them tight with no problems, used blue loctite on the threads. Functions well.

Ive been transitioning all of my receivers to a 45 degree short throw safety for obvious reasons; been using the timber creek safeties but i figured id give another brand a chance, i wouldn't hesitant to buy another one.

The fact that it comes with a bcg & charging handle i cant complain too much, the upper assembly functions fine, i cant attest to accuracy as i havent put groups past 25yds.

My biggest complaint is the handguard, the anti-rotation tabs aren't exactly perfect i cant quite get the picatinny rail to line up perfectly to the upper receiver because the anti-rotation tab prevents it, ill have to take a file or dremel and remove a very small amount of material on one of the tabs. Its not too bad or really even noticeable unless you look really close but Im a bit of a perfectionist.

The milling on the receiver isnt exactly exquisite, there are some milling marks inside of the receiver and its a little rough around the edges where it meets the lower receiver, but once again not noticeable unless inspected really close.

For a novice builder i think this is a great option or if you want a functioning AR pistol on a tight budget.

I actually have bought 3 of these rails over time. They fit seamlessly with the AT3 slick side upper and give the appearance of a monolithic upper.
They work great on mil-spec uppers as well and they look good on them.
These days i only buy rails with anti-rotation tabs, just seems like common sense these days.
I appreciate that it comes with a barrel nut wrench with a 1/2" square for a torgue wrench.
The lock up is solid especially with the additional set screws. My first installation the rail did begin to back away from the receiver, i had noticed a small gap had developed. the installation instruction said to tighten the set screws until they bottomed out on the barrel. I reinstall the rail using 5lbs higher torque on the clamp screws, and then actually tightened (hand tight but still tight) the set screws, using loctite on everything. Have not had issues since.

The finish on the fde is pretty close to Being spot on with magpul furniture.

The black finish however, i am not happy with. When the sun is shining on it, it has a slight purple hue which is extremely noticeable when wearing sunglasses, though it is not noticeable under normal lighting conditions to the bare eye, simply looks like a matte black. Not a deal breaker but worth mentioning. This is why a star is removed.

Id like to see an integrated QD socket but i understand some designs intentionally leave that out, obviously an mlok attachment can easily be added.

Overall a great rail for the price range

Seems heavy duty yet has a small profile. I like these much better than anything else of equivalent price. I love the push button for rapid deployment. I love that they lock in the open position so when manipulating around cover they are not inadvertently pushed down. Windage and elevation adjustments are solid and tactile. No side-to-side wobble when open. Lays pretty close to flat when in the closed position. Has 2 recoil lugs, takes up 2 picatinny slots.

I really like the profile of this stock, has a smaller profile than the magpul, when in the shortest position there is about 1-1/2" of buffer tube exposed between the castle nut & stock. The polymer feels like its just as good of quality as a magpul stock. Fits well on my buffer tube with little to no wobble. Has QD sockets on both sides. Fde matches magpul fde. Great for a minimalist build or sbr.

Ive owned 4 of these used on past and current guns for lights/lasers. The machining is beautiful with a very durable finish, tolerances are exact. The mlok hardware was very high quality no concerns of stripping anything. Mounts rock solid to my mlok rail, lasers hold zero even after abuse, bumps, drops, etc.

Honestly i don't see a reason to pay any more because theres other brands offering the same thing for double the price.

Had written like 3 thorough reviews but it keeps getting deleted when i try to move the cursor to the right edge of text box, so im keeping it short.

Reduces perveived concussion greatly.
Great for home defense as it INCREASES concussion for anyone in front of it.
No reduction in recoil (which shouldn't matter too much for a grown man shooting an AR-15 unless your competition shooting)
Less flash suppression than an A2 but still significantly less flash than just an open ended barrel.
Machined nicely and concetric.
Fits beautifully under my 12" AT3 Spear Mlok handrail (using a 10.5" .300 blackout barrel)
Gets alot of compliments from others.
A little heavy, best for short barrels, anything above 12.5" would get a little front heavy.

Better than just an open ended flash can because this does reduce flash in comparison so youre not blinded by a huge fireball in dark situations.

Muzzle devices like this definitely have their advantages on short barrels intended for home defense.

This is certainly my favorite projectile & load for my 16" .300blk. Cycles properly, good ballistics and I generally get 1 MOA +/-. I've dropped many hogs with this round. Unfortunately in my 10.5" barrel (pistol length gas, unsuppressed), these will not cycle the gun, the projectile is too light and exiting the barrel so fast that there is not enough dwell time on the gas to cycle the gun. All 120grain loads and up cycle excellently, 115grains will short stroke sometimes and 110 grains do not cycle at all. So just keep that in mind. I'm sure with a suppressor there would be enough back pressure to cycle.