by
Leo,
Verified Owner
from FL, United States
Written on August 5, 2025
Bought this set to replace the metal one in order to lighter the whole rifle. Seems to be of good quality and based on reviews and fitting specifications, more likely will not have any problems. Put 4 stars because I am still not putting on but will be back after this weekend to do my final review
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Bigbruce49,
Verified Owner
from OR, United States
Written on March 3, 2025
I installed this on my century VSKA TRP. Fit is tight around the gas tube and the lower section was a snug fit. I wouldn't use it for an optics mount but it's an economical forend to mount other accessories
Cons:
- Slight rotational movement under heave pressure
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Gabe,
Verified Owner
from NC, United States
Written on June 13, 2024
Im sure this product works great just a didn’t work for me. I have a Century Arms VSKA Draco, which I wanted to install this on, but the bottom handguard is a tad too big. After removing the gas tube and the lower wooden part it just would not fit. There was too much wiggle room & it was not flush. As I was reading the comments on an install video, another person said the top handguard did not fit his Century Arms Draco either. As I said earlier I’m sure this product it great just not for me in this instance � Debating if I should take it to a professional gunsmith or just return the product. Not sure yet ��♂️
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
NOT fit for my PSA-AK-47 GF3,
Verified Owner
from ND, United States
Written on June 9, 2024
The handguard does NOT fit a PSA AK-47 GF 3 without some filing done on it. The handguard I received was too narrow for it to slip into place and had to remove excess or trim down to get it to fit. If you want to get it to work like I did you're going to need a Dremel tool and some sand paper. Otherwise, I'd recommend another product or take it to a gunsmith.
Pros:
- Looks great & feels great
Cons:
- May need custom fitting to install properly
Would recommend: No
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Uncle Ray Ray,
Verified Owner
from CA, United States
Written on May 4, 2024
If you are not experienced with fitting this product is not for you , spend a lil more and get a better quality one
Would recommend: No
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
UberMykl,
Verified Owner
from MT, United States
Written on October 11, 2023
If you're decent at using a dremel tool this is a great option for the PSAK-47 by Palmeto State Armory. This is not an exact fit but with a little bit of milling to the bottom foregrip at the locking collar groove and it's perfect! Love the way it looks, adds the rails i need for attachments, and feels good in the hand.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Cody,
Verified Owner
from ND, United States
Written on April 10, 2023
After much trimming and fitting, I got everything to fit. However, there is still a gap in the rear where the top and bottom handgaurds come together, the front has no gap. Took a lot of work getting the top to fit. The bottom was fairly easy, i jist had to use a heat gun to be able to open the rear as it was far too tight to get on.
Would recommend: No
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
GuyinTx,
from TX, United States
Written on June 24, 2022
Word to the wise that the "FAB Defense Upper and Lower Handguard Rail System Set for AK-47/74, Black, AKLU, 1S0-4AK-AKLU-AKLUB" in NO way can fit the Palmetto AK-47 (AK-103). The handguard lower bracket is at least 2.75mm and the slot for it in the replacement handguard on right side is about 1.5 mm. I think I can "fix" it by removing a LOT of material from the handguard. Not very pleased at the moment. I have not contacted customer support because I don't want to have to send it back, get a refund or whatever. I already waited 2 months to get the dang set anyhow.
Cons:
- Needs mods to work with Palmetto Arms
Would recommend: Yes
1 of 1 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Dale Irby,
from MI, United States
Written on March 8, 2022
Why would they design a handguard with a top rail and no way of anchoring it to the bottom rail, the mission first tactical one gives you a set of bolts and there's zero movement on the top piece and this one cost more than the mission first tactical one, it's a nice handguard if you don't plan on mounting an optic, my mission first tactical one has zero play in the optic, and there's no point spending $60 on this one when you can get a Magpul one and you can mount stuff to it still but have it closer to the gun itself
Would recommend: No
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Tim,
from MO, United States
Written on December 17, 2021
This is a great product, good quality material, very solid and easy to install; as long as you have a vise handy. I didn’t use the left side rail, for better grip space. Will eventually get a light and maybe fore grip.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?