Great chassis - FAB Defense UAS-PRO Ruger 10/22 UAS Precision Stock Conversion Kit

This is a good chassis for your 1022, lightweight, sturdy, very customizable. This system will take a standard 1022 barrel but has a removable "insert" that can be taken out if you want to run a bull barrel. The top rail that comes with the pro models are great, the feel solid. The length of pull is pretty exceptional for people 5'10 to maybe about 6'1, give or take an inch or two in either direction. it has a more of a granulated grip on the front side of the grip and more of a studded grip on the back, its great. It appears you can change the direction in which the stock folds on this chassis system. My 1022 comes out to about 28 inches folded and 36/37 inches extended. There is also storage space located in the handle of the grip, use a punch or similar device to open it by pressing a button right by the compartment door, towards the back of the weapon system right at the bottom of the grip. The stock is very solid when extended, no play of any kind in mine. The cheek rest has 5 total positions, fully retracted then 4 clicks up at about 1/2 inch each for a maximum height of 2 inches. I don't feel like its going o break but i will admit you can shake the platform and hear it rattle when its extended higher than an inch usually. Now, that being said, I shoot with mine on the 4th and second highest setting, approximately 1 and 1/2 inches raised, and its sturdy when i shoot with it.

All in all, its defiantly a good system if you want the most out of your 1022, and I'm even going with fab defense accessories all around on this build, minus the optic.