Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
Recommended with Qualifications
Pros:
First, the design allows for the threaded barrel to fit into the gun so that you do not have to remove the thread protector to remove the barrel.
The barrel is well finished and fit right into several different slides.
The thread protector does not come with a rubber ring as most do, so I will have to double-check how well it stays on.
Possible con:
9mm can be tricky. I have two difference cartridge gauges to measure for sammi spec rounds. This barrel claims to be SAMMI spec, but some of the loads that measured fine were a little too long to allow the action to close. (I have had...
Read More...
Read More...
I bought an unexpectedly good barrel. Its real price is higher than what I paid...
A very precisely made barrel. Quite a strict chamber, but at the same time there was not a single bad feed of a cartridge. The coating is very smooth and strong.
The thread protection nut has an external diameter of the barrel. Thus, to pull the barrel out of the slide, you do not need to unscrew it... Well... or if you only have this barrel and need to shoot from a Glock 19l (47, 49, 17 gen 5) you can install and shoot. I have already tried this, and it turns out pretty good. If you need to shoot for a long time, do not forget to tighten the protection nut, or put it on a blue thread lock.
The question of the price is not clear... Why so cheap? Looks like it's been discontinued and is being sold out...
I'll have to buy more...
The thread protection nut has an external diameter of the barrel. Thus, to pull the barrel out of the slide, you do not need to unscrew it... Well... or if you only have this barrel and need to shoot from a Glock 19l (47, 49, 17 gen 5) you can install and shoot. I have already tried this, and it turns out pretty good. If you need to shoot for a long time, do not forget to tighten the protection nut, or put it on a blue thread lock.
The question of the price is not clear... Why so cheap? Looks like it's been discontinued and is being sold out...
I'll have to buy more...
Pros:
- High quaility
Cons:
- None
Best Used for:
- glock 19 gen 1-5
- glock 19 gen 3 clones
Would recommend: Yes
Worked great!
Okay, so a buddy sold me a cheap Glock 19 clone and I just wanted to improve the accuracy a bit. This barrel was on sale for a really nice price, so I took a chance. It was a definite improvement over the stock barrel. I just popped a couple of mags from about 15 feet and everything went where I put it. I'm not a "match" shooter, but I'd say it is a really good quality and the accuracy is at least as good as I am. Only concern is the thread cover unscrews easily so you have to keep an eye on it. I just put a spot of thread locker on it.
Pros:
- Price
- performance
Cons:
- None
Would recommend: Yes
threaded barrel
Fast shipping product fit like original… 1 of my favorite sites to buy from
Would recommend: Yes
Great barrel phenomenal price
First off FM makes great products this barrel is no exception, one of the things I really like is the flush thread protector. Other than that it's as accurate as I am for and finish is perfect and it does what it's supposed to .
Would recommend: Yes
Threaded Glock 19 barrel
I picked up this barrel on clearance for just under $22 for the custom build I did. originally I had a ported barrel of a different brand and it was giving me cycling issues I seen this barrel figured I couldn’t go wrong with it at that price point (seeing as all barrels must meet certain safety requirements) it came in the overall fit and finish was nice. Is it an actual match grade barrel that idk I don’t shoot competitively but im certain at the price point it will be plenty enough accurate for my EDC needs. Only negative thing I could see as potential issue is the thread protector may end up coming loose and getting lost only time will tell on that
Pros:
- price construction quality
Cons:
- None
Would recommend: Yes
The price was so low I had to get one.
I saw this foxtrot mike barrel for an insanely low price on black Friday, so I snagged one. I had some previous experience with FM products as I built a 9mm AR pistol on one of their lowers, and it has been a solid performer. A cool feature of this barrel is that it can drop in without removing the thread protector, and the lockup feels great. My G19 is a very good shooter and the "push test" yields less movement than the factory barrel. I am excited to shoot it once I renew my range membership after the first of the year.
Pros:
- 4150 CMV
- Nitrided
Cons:
- None
Would recommend: Yes
it jams every other round
It’s cheap for a reason I tried different magazines different ammunition once every two or three rounds on the stock glock is didn’t extract correctly
Would recommend: No
Great price
Great price to put a compensator or anything with the same thread pattern on a Glock 19. Barrel works like it should. No blemishes or scratching after a few hundred rounds. Very common thread pattern that will accommodate several accessories. Works on a Glock 26 (hangs out the front some but still cycles).
Pros:
- durable
- nice look
- tons of attachment options
Cons:
- None
Would recommend: Yes
FN threaded barrel for Glock 19
Excellent Threaded Barrel from FM. Fits the Glock perfectly.
Sevice from Optics Planet was 5 star, as usual.
Highly recommend.
Sevice from Optics Planet was 5 star, as usual.
Highly recommend.
Would recommend: Yes
1 of 1 found the following review helpful.
Faxon threaded barrel G43x
I purchased it for my G43x but I ha e not sent rounds through it. I have Faxon on my other firearm since i found good reviews on the internet by various YouTubers. It looks well built and for the price i can say anything bad about it so far. I am not planning on using it for competition drills or range day 500 rounds kind of thing.
I highly recommend!
I highly recommend!
Would recommend: Yes
0 of 1 found the following review helpful.
There are no reviews that match your criteria. Would you like to review this product?