Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
fantastic trigger
I really love this trigger. Thought it was going to be too tough to install myself, but figured i really ought to get to know how to takedown my glock 34... and i could take it to a gunsmith if i screwed it up. I watched a video on installing this - which helped. Turns out, not that hard to do...
Read More...
Read More...
Most Helpful Negative Review
Dangerous piece of junk
No improvement in trigger pull. Firing pin would also fall on reset. Either causing a double fire or full auto condition . Also traded the springs out with the stock connector installed but it did not lower trigger pull weight.Ended up with a high priced take down tool....
Upgrade that may need fitted
Install was pretty easy but be sure to dryfire the gun before loading. My glock is a Gen 2 and would not move enough to allow the striker to fire. This also prevents you from disassembling the gun the normal way! You have to remove the rear cover plate on the slide. After disassembly i used a hand file to remove some material and now the gun has a super light and reliable trigger! Accuracy has went from good to amazing! Ordering another now.
Pros:
- Trigger improves
Cons:
- Some hand working may be reqd
Best Used for:
- Speed and accuracy
Would recommend: Yes
Always a great product
Ghost always puts out a great product. The connector was as described and provided a nice clean trigger pull. The tools that came with the product are helpful for the install and require little Glock gunsmithing knowledge. Overall an excellent purchase at a great price
Would recommend: Yes
Great disconnector for Glock
I installed two of these on two Glock 19 Gen4s. It took probably 1 hour a piece to install. Slow and steady and you’ll be fine. I was very skeptical at first. Overtravel is gone and take up reduced. Trigger now feels smooth with a lighter crisp break.
Would recommend: Yes
1 of 1 found the following review helpful.
Amazing difference in the trigger.
So after installing the trigger it's light, smooth (the Glock bump is gone) and great reset. Installation was a bit tedious filing down the one part but well worth it. I went to the range and shot 250 rounds through my Glock 19 with 0 issues.
Very impressed .
Very impressed .
Pros:
- cost
- Smooth trigger pull
- Short reset
- light pull
- No Glock Bump
Cons:
- installation can take a while
Would recommend: Yes
The shortest reset I have ever felt with an stock trigger bar
I installed everything available in the kit except for the striker springs. I prefer to keep an OEM striker setup to avoid light primer strikes and having to upgrade . It took me about an hour to fit the connector to my frame. The filing and fitting process was rather easy, I just took my time to ensure that I wouldn't remove too much material. All over-travel is eliminated once the connector is properly fit. And since the trigger bar does not go back farther than it has to (over-travel eliminated), the reset is then shortened. This, in my opinion, is the best connector that you could use with a factory trigger bar, and if you're able to fit it yourself.
Pros:
- The shortest reset possible with a factory trigger bar
- Clean trigger break
Cons:
- Requires Hand-Fit Installation
Best Used for:
- All Glocks
Would recommend: Yes
1 of 1 found the following review helpful.
EVO Elite for Glock
This has made the Glock trigger SO much smoother and crisp. I don't find myself pulling to overcome the weight of stock. I had it installed by a Glock Armorer for like $20 and was done in about an hour. After sights, best upgrade for my Glock.
Would recommend: Yes
1 of 1 found the following review helpful.
Smooth as Butter
I installed this kit in my Glock 22 Gen 4. It takes a little time to trim down the connector to right dimensions to get it to work just right but I was pleased with the results. Just don't change the connector geometry as it supposed to have a slight bend to it. Sure there are newer and easier trigger mods out there but it's still a nice modification. I used the six pound trigger spring in my install which made for a nice string audible and tactile trigger reset.I also hand polished certain surfaces. The trigger reset is still long and there are kits out there that offer a shorter trigger reset but it's still nicer than a stock trigger. Note: You have to know what you're doing or else have a certified armorer install this kit for you. There's a ton of correct info out there on the web and YouTube. Warning: Don't change the geometries on anything. Have fun! :)
Pros:
- Nice trigger function
Cons:
- Trimming the trigger connector takes time.
Would recommend: Yes
1 of 1 found the following review helpful.
Ghost evo kit
I have not had a chance to fire it yet, but I can definitely tell a difference in the take up, break, and reset from just dry firing it. It is definitely an improvement from the stock configuration. I do wish the instructions were more detailed.
Pros:
- reset
- Take up
- break
Cons:
- None
Would recommend: Yes
ghost evo for glock 19
this kit makes a big difference in the way the trigger feels.
easy installation, there are plenty of videos on you tube to guide you through the installation.
the trigger feels smooth and crisp, with minimum take up and a great reset.
if you polish your trigger bar and the safety plunger with this kit you will have a great glock trigger.
the price from optics planet was the best from a reputable seller.
I will buy more for my other glocks.
easy installation, there are plenty of videos on you tube to guide you through the installation.
the trigger feels smooth and crisp, with minimum take up and a great reset.
if you polish your trigger bar and the safety plunger with this kit you will have a great glock trigger.
the price from optics planet was the best from a reputable seller.
I will buy more for my other glocks.
Would recommend: Yes
Huge improvement
Love how it lightened up and smoothed out the trigger pull. There is verry little over travel now that I installed it and the trigger pull is much more even. Installation was simple but is require some grinding of the connector. I would highly recommend it.
Would recommend: Yes
There are no reviews that match your criteria. Would you like to review this product?