by
josh,
Verified Owner
from NV, United States
Written on February 23, 2025
Swapped this trigger unit and main spring in my VSKA special edition and not only can I adjust where my finger sits, but the pressure is literally cut in half. Plus it just looks cool
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
josh,
Verified Owner
from NV, United States
Written on February 17, 2025
Looks great, easy install, main spring sold separately. Adjustable makes for more comfortable grip. And trigger pull is literally half the effort as stock trigger that came on my VSKA. I’d say it feels about 2 lbs. definitely recommend
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Ro C,
Verified Owner
from UT, United States
Written on January 10, 2025
It does lighten the trigger pull alot! the reason i gave it 4 stars is because i started getting light primer strikes which i never had a problem with before
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Ro C,
Verified Owner
from UT, United States
Written on January 5, 2025
Easy install in my Wasr 10 along with the safety selector I recommend buying it to be on the safe side. But it did lighten the trigger pull but recently I started getting light primer strikes I’m going to switch ammo and see if that’s the case
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Shevchenko,
Verified Owner
from MA, United States
Written on March 6, 2024
It's hard to fault this product not fitting my mak90 considering it's written on the package you may need their safety selector. we tried a chinese, russian and polish safety selector but it did not work. Ordered up the HIPERFIRE safety selector and we were back in action.
Cons:
- required additional part to function
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Tommy,
Verified Owner
from NC, United States
Written on March 5, 2024
If you have never tried Hyper Fire and is looking for a great trigger, Hyper fire is a must have. Ever since I bought a hyper fire drop in trigger for my AR-15, I haven’t looked back since. This trigger is super nice and it is super crisp with a very light pull. If you’re using your rifle as a home defense weapon, I would not recommend it because it is too light. But if you’re looking for something to train and shoot targets, I recommend this trigger. The install is very simple and I know you’ll love it!
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
JG,
Verified Owner
from SC, United States
Written on February 15, 2024
ALG triggers are Sold out everywhere so before this goes up in price or sell sell out go for it great trigger This trigger pull weight about 2.1b don’t let people fool to only wait for an ALG trigger the hiperfire is just as good.
Pros:
- Very good light weight trigger
Would recommend: Yes
2 of 2 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
HA,
from GA, United States
Written on December 28, 2023
Clean crisp trigger, easy to install. Light but not too light. Very nice with std braided wire main spring or ALG stronger spring. Clean audible and tactile reset. Can be shot faster than tapco g2. Worth the $, but pretty afforable @85.
The safety is easy to install too. Just use some loctite on the set screw to fit to trigger and let it cure for a bit before use. Golden.
Pros:
- Affordable
- trouble free
- Nice reset
- Crisp & clean break when firing
- Not too light
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
GMS,
Verified Owner
from TX, United States
Written on September 12, 2023
This trigger gives your WASR-10 a crisp 2.5# break. You do need the Hiperfire adjustable safety as the OEM safety will not engage this trigger.
The reset is very tactile. Installation took less than 15 minutes.
Cons:
- need the Hiperfire saftey
Would recommend: Yes
2 of 2 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?