Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
Should be included with every 510c; but it works.
This is a plate that matches the foot print of the 510c. It is well made, matches the finish and does what it’s supposed to do.
I’m removing a star because it should be included standard with every 510c.
HS510C Riser
This riser is well made and easy to install. When you need a little more height to your 510C, so that you’re not cranking your neck sideways to see through the optic, get this riser. Faster aiming and target acquisition, more comfortable shooting.
Would recommend: Yes
Helped Out
This riser helped lift my 510c just enough. I bought another 1/2-inch riser to go with it. Still have 1/3 co-witness on my Hellion. Looks good and fits well. For that little extra lift, I would recommend.
Pros:
- Looks great and fits well
Cons:
- None
Best Used for:
- Riser for red dots
Would recommend: Yes
Works good
This really should be included with the optic. Works well and everything fits together as it should. Sight picture is still very nice if you have to run back up iron sights. If you are ordering a 510c go ahead and order this at the same time, you won't be sorry.
Pros:
- Fit and finish
Cons:
- Should be included with optic
Would recommend: Yes
Just what I needed
This is exactly what I needed to raise the sight higher to get the 1/3 co witness. Also if anyone has issues with mounting thinking the screws are too short, there not, first mount the plate to the sight then the base to the plate. I'm new to this so it took me a minute to figure it out.
Would recommend: Yes
11 of 11 found the following review helpful.
Great material, precision construction.
Fits perfect and the screws even had locktite applied to the tip to ensure they stay tight. Highly recommend this product. The riser offers a perfect 1/3, which sits the optic right above the magpul flip ups. Minimal adjustment required to the hm3x magnifier.
Would recommend: Yes
5 of 5 found the following review helpful.
510c riser plate
Is what it is. Does what it is supposed to. Fits perfectly with 510c. Shipped faster than expected given it was on backorder. How much more can I say about a riser plate. Why do these have to be 200 characters
Would recommend: Yes
8 of 9 found the following review helpful.
An absolute must have
I have a Holosun H510C-GR and then mounted a Holosun LE117G (laser) on my pistol’s 12 o’clock position. Because the laser sits about 1/8” too high, this HS510C riser plate allowed me to co-witness my H510C’s green dot. I still need another HS510C riser plate for my other pistol (configured with the same Holosun optic and laser).
Pros:
- Excellent quality
- Excellent construction
Cons:
- Took forever to get it
Would recommend: Yes
2 of 2 found the following review helpful.
Great 1/3 co-witness riser
Overall, its a great riser that I use for my duty rifle which takes an occassional toss/impact. I didn't need the riser until I broke my backup magpul sights and upgraded to some fixed Daniel Defense iron sights, which cluttered my area of view in my optic. Target identification is something I have to be on my game with and adding this riser really freed up some much needed area of view. The cost seems a bit to high, but the item works great and so far, no damage.
Would recommend: Yes
1 of 1 found the following review helpful.
Perfect for 1/3 Co-Witness
I have an AR upper with A2 fixed front sight. The HS510C sits at absolute co-witness level. For short ranges, 7m or so you need to aim at the bottom of the 65moa reticle. With the 1/3 co-witness it sits slightly above the A2 sight and is perfect for picking up the dot at any range. I zeroed at 50m. I can shoot 1" groups at 50m and at 7m using the bottom of the reticle consistently hitting 1" groups without worrying about my hold. It is quality made, went on super easy. Applied a little blue locktite when I added it and it is holding zero perfectly. Placed my order with Optics Planet and 7 days later it was on my AR. Highly recommend the spacer and Optics Planet!
Would recommend: Yes
2 of 2 found the following review helpful.
Perfect for the HS510C on X95
I put a HS510C on my X95 and really liked the optic and could shoot with it ok, but it felt like I really needed to push my face down to get a good sight picture. I added this which feels like a great sturdy addition and only took a few minutes to put in and it is much more comfortable and a bit easier to get the rifle up and aimed on target
Would recommend: Yes
2 of 2 found the following review helpful.
There are no reviews that match your criteria. Would you like to review this product?