Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
12:00 rail sizing
Quality is good, but figuring out what you need is really confusing. Spend some time on the JP website figuring it out. For the 12:00 position:
JPTR-R Rifle length is 12"
JPTR-M Mid-length is 9"
JPTR-FS FS is typically for the front sight and is 2".
Please remember these are only for the 12:00 position and as far as I know are compatible on all MKIII style including their Signature series. Shorter ones are compatible with longer rails if you want to save a little weight. Please remember that one end is designed to bridge the gap over the barrel nut and does not have a hole for a screw.
Th...
Read More...
Read More...
If you need it, you need it
If you have a JP MkIII handguard, and you want to mount something that needs this much rail space, well, you need this. Nicely sized for a Magpul AFG2.
Well made, of course. Silly expensive. Perhaps a tad heavy if you're counting every ounce.
A tip: included are 3 10-32 screws and a threaded backer plate with 3 holes. Note that there is a 10-32 threaded hole in the fore/aft center of the handguard in the 6 o'clock position. You can put one of the screws in that hole instead of the backer plate and it works fine, so your position options along the bottom of the handguard are basically unlimited.
Well made, of course. Silly expensive. Perhaps a tad heavy if you're counting every ounce.
A tip: included are 3 10-32 screws and a threaded backer plate with 3 holes. Note that there is a 10-32 threaded hole in the fore/aft center of the handguard in the 6 o'clock position. You can put one of the screws in that hole instead of the backer plate and it works fine, so your position options along the bottom of the handguard are basically unlimited.
Pros:
- None
Cons:
- Expensive
Would recommend: Yes
Solid mount
Rock solid mate up with jp tubes for front sight and no wandering zero
Pros:
- Solid well built
Cons:
- Pricey
Best Used for:
- JP Enterprises Rifle MK3 Rapid Config
Would recommend: Yes
Great quality Rail
Added rail for bipod. Rail is very durable and secure when placed on forearm. Very pleased.
Would recommend: Yes
You need it!
This proprietary picatinny rail is absolutely necessary for the MK3 handguard especially if you plan on iron sights. It also gives it the full look to the rifle after installation. I really didnt think so since the MK3 handguard is the best looking handguard in the market but after adfing the picatinny rail WOW what a difference!! A must have with the MK3!!
Would recommend: Yes
Perfect fit
I got a JP skinny handguard for a 260 REM large-format AR build based on a DPMS LR308 upper. Love that float tube; its AR-15 diameter works just fine on my AR-10-class rifle. I wanted to mount a UTG Over Bore bipod (mounts to a front sight rail so the barrel hangs below it - really like the design).
This front sight rail had a very fair price and fit flawlessly; tight and with no rocking. I feel confident that it will handle the weight of the front half of the rifle hanging under the bipod.
This front sight rail had a very fair price and fit flawlessly; tight and with no rocking. I feel confident that it will handle the weight of the front half of the rifle hanging under the bipod.
Pros:
- Becomes one with the handguard
Cons:
- (none)
Would recommend: Yes
Tactical Rail Kit
Item was exactly what I needed being I have a older hand guard requiring a backer to attach the picatinny rail section. If your hand guard doesn’t take MLOK, then this is what you’ll need. Quick turn around from order to receiving. Thanks.
Would recommend: Yes
Jp enterprises tactical rail kit for jp hand guard
Jp tactical rail kit was a piece of cake to install, required some bule loctite & some fiddling to get it in. It look’s high quality precision machine. Excellent would recommend this product for you precision rifle shooters. Great for high end bipods.
Pros:
- light weight
- strong, well made & light wieght
Cons:
- price
Best Used for:
- Mounting bipod
Would recommend: Yes
High Quality
Like everything JP Rifles makes, this tactical rail kit is of the highest quality. If you have a JP handguard and don't have the need for a full-length rail but want an iron sight at the front, then this is the perfect solution.
Would recommend: Yes
Not as depicted
This rail is not as depicted. I sought this to specifically mount a forearm grip on the free float tube of my Bushmaster XM15 Varmiter Carbine. Both ends have ramps instead of being clean cut notches which, makes the end of the rail useless. My forearm grip has two notches on either end that need to rest in a grove but can't. I'd like to say this is a well built product but since I'll have to machine out full groves in the end before I can use it, I have no idea how it will perform long term.
Pros:
- None
Cons:
- Not as depicted
Would recommend: No
2" top rail.
JP Enterprise proprietary. I changed out the Allen with the torque screws from the older model hand guard. They work better and don't strip when you move them around. No need for lock tight, just set to 20 inch pounds.
Would recommend: Yes
There are no reviews that match your criteria. Would you like to review this product?