by
Eric,
Verified Owner
from FL, United States
Written on August 1, 2018
I've purchased 2 Leapers UTG PRO for my rifles, this product cant be beat, it comes with everything needed to install, wrench, shims, screws, allen key and clear instructions. had my installed in 10 minutes. There are many more other pricier brands out there that do the same, for my money this is the best all around
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Yz,
Verified Owner
from PA, United States
Written on May 16, 2018
I’ve been dealing with A.R. 15 and 10 platform For a while now and I would truly recommend these handrails tight fit easy application just as good as any of the high dollar ones Matched up perfectly on the Palmetto State AR 10
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Les,
from OK, United States
Written on June 9, 2017
I installed this handgaurd on a DPMS high receiver and it matched up perfectly. Overall finish and quality is just as good as any of the high dollar handgaurds. I will be buying another in the near future.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Joe A Gallo,
Verified Owner
from NC, United States
Written on April 15, 2017
Absolutely love the Leapers UTG Pro Super Slim Free Float Rails. So easy to Install anyone can do it. The fit and Color Match was great and allow for a seamless fit to you upper with a straight and Flat upper rail. I prefer the Key Mod design but the M lock version works as well. Color and alignment were perfect as well as the length. The super slim design with all of the attachment placements available on the Rail make additions to the rail simple and save a little weight
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Jet1967,
Verified Owner
from WA, United States
Written on March 30, 2017
The quality of this handguard seems pretty good but it may not be usable on your DPMS LR308. It is advertised as being high profile but the receiver and handguard rail heights do not match by quite a bit. I realize DPMS has modified its 308 uppers over the years. I was an early adopter of the 308 AR platform. I guess the rail height on my AR might be considered very high. The distance from bore center line to the top of the rail is approx. 1.63". The UTG product missed that mark by almost a quarter inch.
Would recommend: No
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Jacob,
from OK, United States
Written on February 11, 2016
you cant get a quality full length rifle free float for a lr308 for this cheap anywhere else. tight fit, easy instructions. Installed in about 40 minutes, only downside could be all your friends being jealous as h*ll at the range.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Ryan,
from WI, United States
Written on July 7, 2015
This handguard is great!! Comes with wrench to install and is a great quality. The handguard fit perfectly on my Aero M5 upper. The design of this handguard is better than any other design I have seen.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
TC,
Verified Owner
from TX, United States
Written on April 7, 2015
This handguard not only looks good but works well too. It comes with all the mounting hardware and even the barrel nut tool to install it. It is very easy and the locking tabs really keep the handguard aligned with the top rail. Just make sure you get the right handguard since this one is for the high profile upper.
Pros:
- Quality
- Ease of installation
- All Hardware included
Would recommend: Yes
1 of 1 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Apostlex,
from FL, United States
Written on March 23, 2015
The is a very well made free float rail for LR-308, Fits perfect and even match to my Aero 308 Hi Profile 210 tang. Feels good in your hands and is very light weight feel and look. Finish is nice and over all I give it 10 out of 10 for everything, looks, weight, strength and installation.
I Would buy another one!
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Curt,
from KS, United States
Written on January 4, 2015
I like this tube. It did not line up with a DPMS upper it is just a little taller about a 1/16" taller. I will still use the tube. It is light weight and feels good in my hand. I wish it was lined up with the upper.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?