by
Michael Gonzales,
Verified Owner
from LA, United States
Written on June 9, 2022
I mounted this on the barrel of a Colt AR15A2 so I could run an Insight Technology M3x. These Colts all have pencil barrels and this handy little jewel mounted up without issue. This mount comes with different length screws, so no problem with screws too long or too short. I bought the 2.4 inch which fits my needs perfectly.
Definitely a must have if you have standard Colt handguards and don't want to change them out to rails.
Pros:
- Easy to mount
- Looks good
- perfect length (2.4")
Best Used for:
- mounting flashlights, lasers and any other piece of equipment using a rail,
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
CP,
from TX, United States
Written on January 11, 2018
I bought this for my Mini-30, to add some flexibility to the platform. The single rail mount worked out perfectly... I use it to mount a Picatinny bipod... The rails performed flawlessly, I fired 200+ 7.62X39 rounds through the weapon and all is secure.
Pros:
- Flexible configuration
- secure attachment
Would recommend: Yes
1 of 1 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
John Bishop,
Verified Owner
from CA, United States
Written on April 6, 2016
It was hard to find a barrel mount that would fit a Mossberg 500 short barrel .410 but this did the trick perfectly ! Was able to add a high lumen flashlight so I will be able to prevent any mistakes in determining who is in my house at night before ever pulling the trigger.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
t.b.c.,
from GA, United States
Written on August 13, 2015
I spent hrs. trying to find a unit that would work on the rws460magnum barrel ,& with a little J B water putty & my ziz-wheel, to cut off the bottom area of the mt. it works great . Had to dreamal out the forend for green laser from (sight mark ) but all the mods. worked out grate . very acc. at 50y. high &low at different yards easy now , almost can shoot from hip with acc.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
mnt skinner,
from CO, United States
Written on July 12, 2015
I bought this as a cheaper alternative to an accustrut for an older mini14. It made my groups open up even more than without the utg rail, so I took it off and may install on a shotgun. It did not work at all as a replacement for an accustrut but is still a decent product. I would never put any attachment directly on a barrel unless there were no other alternatives.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Antelope assassin,
from KY, United States
Written on July 7, 2015
I have a 30 carbine and needed a mounting point for a laser sight it fit fine it has moved so I tightend more if that doesn't stop it ill move it forward against the front sight then it won't be able to move. For the price I don't know how you can beat it.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Thad,
from TX, United States
Written on February 6, 2015
The Leapers Universal Single-Rail Mount was the right item for my purpose. It is mounted to a Henry 22 mag Golden Boy on the under side or the barrel and magazine to which a Flashlight/Laser Red dot unit is attached. Because of the diameter of both barrel and magazine was larger than the mount would accommodate, the screws were replaces with longer screws. This worked better than expected. I am well pleased with my purchase.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Michael,
Verified Owner
from CA, United States
Written on January 17, 2015
This rail comes with 3 sets of screws. It works great for mounting a red dot optic directly to the barrel on my Kel-tec sub 2000 in 9mm beretta. inner diameter is smaller than the 3-slot and 5-slot UTG picatinny rail mounts.
Would recommend: Yes
1 of 1 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
Used two of these to avoid milling rear sites from the barrel - mounted high 1" rings and scoped the rifle with a 2x7-28 pistol scope. Accurate out to 100 yds with touching holes - within 3/4 in grouping @ 200 yds.
Pros: Easy to mount -
Cons: modifications required
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
great fit for my airguns, for a quick refit of options extra..i.e laser, led flashlights. Very light ...will throw off balance of artillery hold for break barrel guns
Pros: will hold up to magnum spring airgun double recoil
Cons: only bottom rail system
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?