Waste of money - Lee 90304 Classic Turret Press Kit Steel

I have run into a few different issues with several of the items in the turret press kit. The first one is the powder measure, it leaks from around the drum and on the back by the arm. I've tried different levels of tightness on the screw, I opened it up and cleaned it out a few times, I tried coating everything with graphite powder, I ran about 50 loads through, and it still leaks pretty bad. I'm using Winchester 296 powder. Also, I'm not sure if it's a problem, but the measure hole in the drum doesn't seem to fully line up with the funnel coming from the bottle. I'm getting about a .4 grain swing either way, which seems like a bit too much when loading 15.7 grains. I noticed the mount for my Safety Prime is broken, the tab that keeps it from hitting the ram is missing, so it keeps popping off unless I hold it out of the way. And I'm getting a few dropped primers too. I got a case length gauge to go with the cutter and lock stud, and the threads were missing, not stripped, just missing like they were never machined in the first place. I also bought a 300 blackout die set, and the full length sizing die is leaving a scratch in the case. I'm a first time reloader and all these issues have come up already, so it's making it hard to get into reloading when it feels like I'm stopping at every step to fix something. I will not be buying any more Lee products. Save up a little more and buy RCBS or something else.