Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
Space saver
I have limited space the LEE RELOADING STAND fits perfectly, works well and is worth the price. The stand was easy to assemble the extra leg holes are perfect for peg board hooks. For my use I didn't need the counter weight and for the long haul of light reloading this stand will last, it's also portable.
Great reloading stand but buy the right brick
This reloading stand is very handy and portable; I like not having to mount my reloader to my work bench each time I use it! If it's cold out and I don't feel like heating up my garage I just take it into my Gun room and reload there. I made a mistake by buying a different brick or "block" that you see in this photo witch I've have seen two different blocks in other photos but if you do not buy this one your other reloaders will not fit without hitting the block so the one in this photo is the right one to buy. the only other thing i wish was different on the stand is the top plate is drilled and taped for the press hold downs, but the bottom plate needs a wrench and screwdriver to tighten down (need three hands) but not that big of a deal.
Would recommend: Yes
Excellent stand!
Perfect for the Leep press I purchased. MY old workbench is a particle board top, so I wanted something sturdier to mount the press too. This floor stand is just right. Easy to assemble but DO look at the directions to get the right fasteners into the right holes. Stove bolts go on top and regular screws in the bottom platform. Don't ask how I know that can be mistaken! Very satisfied with it. Should have press up and running soon!
Would recommend: Yes
Excellent addition
I’ve seen countless videos online of bench presses that are not sturdy and look as if they’re about to break away from their mount. Not the case with this Lee reloading stand. It is solid! I like that extras can be added to it and that it can be customized to my liking. I’m very happy with the purchase.
Would recommend: Yes
1 of 1 found the following review helpful.
Nice Stand
Dig down to the bottom of your toolbox to get the SAE wrenches and a Phillips screw driver. No Metrics on this puppy. Quite a pleasant change. It came with the exact amount of bolts nuts and hardware needed. So much for that Chineese quality control where your lucky to get everything.
I had ordered a #90687 Bin and Bracket separately BUT it came with one. So I have 2 mounted on it now. Also ordered the Die Storage Rack #90680 for my dies. Putting this together with suffering a past broken back and terrible vertigo was not hard. I did it seated in my recliner. I did have to get on the floor to put the shelf on the bottom. The 4" x 8" x 16" concrete block shown DOES NOT COME WITH THIS. I will see how this works if I can ever get some primers....
I had ordered a #90687 Bin and Bracket separately BUT it came with one. So I have 2 mounted on it now. Also ordered the Die Storage Rack #90680 for my dies. Putting this together with suffering a past broken back and terrible vertigo was not hard. I did it seated in my recliner. I did have to get on the floor to put the shelf on the bottom. The 4" x 8" x 16" concrete block shown DOES NOT COME WITH THIS. I will see how this works if I can ever get some primers....
Pros:
- Nice small sized for easy storage
- Not hard to assemble
- I like the storage shelf for when not in use
Cons:
- Not much to say bad I haven't used it
- Lee should manufacture and sell the extended top or which they show plans for on back page of the manual
- The press when attached to the steel base block is near impossible to slide into the storage tray.I have to smack it with a hammer to remove it
- Also when attached to the steel base plate it will not slide in place on top. I found it easy though to loosen the screws there and retighten. I guess that will be an every time I use it thing
Best Used for:
- Reloading
Would recommend: Yes
1 of 1 found the following review helpful.
Game changer
Living in the Midwest without a heated garage, this has allowed me to reload inside easily. Sturdy enough to reload over a thousand rounds in a week. Takes up minimal space and fits in a corner of my office.
Pros:
- Sturdy
- practical
- convenience
Cons:
- None for me
Best Used for:
- Reloading - all calibers - rifle & pistol
Would recommend: Yes
1 of 1 found the following review helpful.
Set up and
It works like they say. Did not have to anchor it. Can be moved where I want. I'm a beginner so still learning. It seems to be pretty sturdy. And was pretty simple to assemble. If you need space this is a great way to reload.
Pros:
- Storage for other presses
Cons:
- None
Best Used for:
- All reloading
Would recommend: Yes
1 of 1 found the following review helpful.
Beautifully designed product.
This table is perfect for the job, and was very easy to assemble. The packaging, instructions and construction materials were excellent. It is very stable with a turret press installed, and there is room for two more presses. A very nice piece of equipment.
Would recommend: Yes
Terrific Stand
Very solid stand that does not take up a lot of space. It's recommended the you use a cinder block or other weight but it is very stable without. I will add a block just to be sure it stays stable. I would certainly buy another and recommend it highly.
Would recommend: Yes
Great press stand
The Lee Precision Stand is a great addition to my reloading tools. I only have a very small space that I reload in and this stand is the ideal size for me. It is well built and very sturdy. The stand was easy to assemble and set my press on. I load mainly pistol loads and this stand has handled the work great.
Pros:
- Very sturdy and great price.
Cons:
- None for me
Would recommend: Yes
2 of 2 found the following review helpful.
There are no reviews that match your criteria. Would you like to review this product?