Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
Lee 91551 Pro 4000 Press Kit
Nice beginner press, with lots of options. You will end up getting new/other gage dies, and this press offers a good Progressive action to reload easily and quickly.
There are a couple features that I didn't particularly care form, even a beginner. The Primer feed is cumbersome and hard to get good with. The case loading tubes need tape to help keep them from wiggling all over the place, and has to be lined up just right or it won't place the brass accurately.
Get a single stage or different brand
This press is extremely temperamental, the instructions are not clear, to much plastic that is easily breakable. Haven't evem gotten through 50 rounds in a week, between the press pulling apart, the primers not seating, and the case feeder being in the way of normal function I will not recommend this press. Very frustrating to try to use.
Would recommend: No
Pretty easy to set up, everything you need
Bought this with the intention of also reloading 9mm Luger and 6mm ARC. It should be capable of reloading every cartridge under a certain length, and I think even .308 is still short enough, so it's a solid purchase. The powder measure doesn't leak, all of the parts just fit together well and work.
One thing of note is that you don't buy shell holders for loading, you need to buy entire shell plates for this model. You then disassemble the press and install the new shell plate after taking the old one out. I have zero idea how to do so, but i'll have to do it sooner or later to get to my 6mm ARC loading (Already have plate, dies, powder, bullets, primers, and brass, just need to install).
One thing of note is that you don't buy shell holders for loading, you need to buy entire shell plates for this model. You then disassemble the press and install the new shell plate after taking the old one out. I have zero idea how to do so, but i'll have to do it sooner or later to get to my 6mm ARC loading (Already have plate, dies, powder, bullets, primers, and brass, just need to install).
Would recommend: Yes
1 of 1 found the following review helpful.
There are no reviews that match your criteria. Would you like to review this product?