Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Negative Review
Disappointed
While the product is a direct fit for the Universal Decapping Die from Lee Precision I feel the part lacks the quality that it should have. I honest to God broke 3 of these is 20 minutes decapping a variety of calibers on my Lee Classic Single Stage. The tip of the rod would bend to a point that it would snap when attempted to be straightened. Where is the pride in craftsmanship?
Lee decaping pins
Came quickly and did what they stated. Would order them again.
Pros:
- reasonable priced
Cons:
- non
Best Used for:
- Decaping
Would recommend: Yes
Lee Universal Decapper
I haven't used the decapping pin on any of my sizing dies for years. After breaking decapping pins using the included pins with either Hornady or RCBS die sets, I found the Universal Decapper from Lee. I used the original one for a number of years and only needed to replace it because I forced it too hard into a case that actually had a smaller case inside it I was unaware of and bent the pin. I was actually able to bend the pin back into place and use it but decided it was time to replace the original pin. For only around $4 I replaced the "bent" decapping pin. These work for all your cases.
Would recommend: Yes
Lee universal decapping die
Works just like it should I decapped around 1200 223 nato brass without breaking the pin a definet plus I would highly recommend this product to anyone decapping prior to cleaning. I have been using Lee reloading products for years 99% of them worked great
Would recommend: Yes
Questionable Quality Pin..
Bought this replacement after mine broke decapping militairy crimped brass. The replacement had a tip turned from what appears to be thin, soft bar stock. Cut with a dull bit and terrible runout. Looks poorly made. Almost broke looking at it.
Reccomend taking the old broken pin and chucking it in a lathe/powerdrill+vice, then reforming the shank for a new pin with a file. Probably can do a better job; quicker, for less.
Reccomend taking the old broken pin and chucking it in a lathe/powerdrill+vice, then reforming the shank for a new pin with a file. Probably can do a better job; quicker, for less.
Pros:
- uhmm....
Cons:
- poor finish
- Soft material
- overpriced dowel
Best Used for:
- replacing a shortened/broken pin
Would recommend: No
1 of 1 found the following review helpful.
Good price for the bang
This is a good product but it is very fragile. I usually 4 or 5 at a time. It's always good to have spares. the one thing that is good about it, is that is universal. One fits all the Lee dies unlike others out on the market.
Would recommend: Yes
Lee decap replacement pin
Broke the first one. perhaps not aligned properly
Pros: works
Cons: too fragile
Pros: works
Cons: too fragile
Would recommend: Yes
Excellent Value
I bought this product to manually de-prime cases with the thought that someday I will start to reload. This product is perfect for my intended purpose. It is strong and works on both pistol and rifle cases.
Pros: Very durable, economical
Cons: None
Pros: Very durable, economical
Cons: None
Would recommend: Yes
There are no reviews that match your criteria. Would you like to review this product?