by
Your Mom Says Hi,
from FM, United States
Written on March 5, 2025
Luth, I usually dig their stuff, but the hole in the windage drum was waaaaaaaaaaay to small for the supplied roll pin. I should have known better. There are numerous others with the same issue. Nothing I could do short of opening up a bit, and I dont have that many Fs to give or that small a bit, so I'll use one from another manufacturer. I suggest you do the same
Would recommend: No
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
William Tinsley,
Verified Owner
from SC, United States
Written on July 21, 2024
Great for finishing my a1 copy build. Authentic style rear sight.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
William Tinsley,
Verified Owner
from SC, United States
Written on July 14, 2024
Works great easy to install just what I needed to finish my a1 build.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
DW77,
from GA, United States
Written on November 14, 2023
This rear sight is easy to install and dead on accurate , will buy again.
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Matt B,
from CA, United States
Written on September 22, 2021
Leaf spring is too long and stiff to fit in the Luth Ar upper. Barely able to install the sight and windage adjustment is impossible to use due to the excess tension. Now I have to disassemble the sight and find a new leaf spring.
Would recommend: No
1 of 3 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Foolhardy,
from CA, United States
Written on June 27, 2021
Bought this rear sight kit to complete my stripped upper. Unfortunately the roll pin was missing from the kit. Thankfully I was able to get one from an old trigger guard I had laying around and complete my build. Otherwise everything installed just fine without any problems.
Would recommend: Yes
0 of 1 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Maurice,
from MS, United States
Written on March 25, 2021
This came with an A2 length screw, this advertises as an A1 sight, but comes with A2 parts. Is that false advertising? Save your time and money, and order from somewhere else. I had to wait for this order for a month, and it's not as advertised when it shows up, very disappointed.
Would recommend: No
0 of 2 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?
by
Harrison,
from UT, United States
Written on January 16, 2021
Sights installed with no problem and adjusted easily. They’re a little stiff, and there’s a little extra material on one of the apertures which makes it slightly less than perfectly round. It isn’t noticeable when looking through the sights, and didn’t effect accuracy at all.
Pros:
- Accurate
- Inexpensive
- Looks good
- easy to adjust
- Period correct
Would recommend: Yes
0 of 0 found the following review helpful.
Was it helpful to you?
Yes
|
No
You said this review was not helpful.
Would you like to change your vote?