Your Browser is OutdatedAdjustment threads not tapped deep enough - Luth-AR AR-15 Adjustable Gas Block .750 ID
Review for Luth-AR AR-15 Adjustable Gas Block .750 ID
Compare (0)
1 item has been added
Add at least two items to compare
bill's Review of Luth-AR AR-15 Adjustable Gas Block .750 ID
Good piece if you are a machinist, need to remove 1/4" of the threads on screw end, just to reach the port. Or a bottom tap with small shank would work. Size(3/4") is good so should fit the barrel.
Pros:
- Cheap
Cons:
- Needs work
Would Recommend:
No
1 of 1
found the following review helpful.