Solid mount - Midwest Industries AK 47/74 Generation 2 Aimpoint T1/Primary Arms M-06/Vortex Sparc Quick Detach Modular AK Scope Mount

I've been very happy with this mount. The locking QD lever is solid and cannot be unintentionally released. The T1/T2 footprint was machined to spec and worked with multiple optics. MI even includes screws to mount the Primary Arms microdots. I've found that the screws included with my other optics, which included a Sig Romeo 4T and Holosun 515CM, worked with the mount. The MI mount seems more solid than the RS mounts but I believe it also weighs a little more. The Gen 2 mounts can also be centered over the bore by sliding the upper and lower portions relative to one another. Once I got the upper aligned, I used blue loctite to secure the screws that hold the upper and lower together. I have had no issues with the mount holding zero, though I have no subjected it to drops, etc. I have used this mount on a PSA GFE and a PSA AK104. If you plan to use the MI mounts on a PSA AK you will need to file some material from the lower mount to accommodate the rear rivet that holds the side optics mount on PSA AK's. It seems PSA's rivet sticks out higher than others. I did this with some simple hand files and then re-anodized it with Birchwood-Casey Aluminum Black.