Your Browser is Outdated
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
Great gas block
This is the only gas block I use on uppers where the A2 front sight is going to be removed. Because it's a longer gas block, it covers the A2 tapper pin holes and has 3 set screws rather than 2 like most micro gas blocks. The extra set screw is nice. Can't go wrong with this gas block.
low-pro gas block
item is as advertised. I was replacing the A2 and plastic forend on my AR. This allowed for the installation of a full length handguard. Item shipped with fasteners and thread sealant.
Would recommend: Yes
MI Low Pro Gas Block .936
Tight fit on my .936" gas journal that is over 1" long. You need to be able to fit up your (3x) set screw holes but that is easy enough with any jig that sets the first hole if you have a vise and drill press.
Pros:
- Ease of insallation
Cons:
- Need tools to install
Best Used for:
- Any & All Builds
Would recommend: Yes
1 of 1 found the following review helpful.
only one i use
i think this is the best bang for the buck..made of good steel..3 set screws...it aint moveing..it is low profile and will fit under a slim forearm no problem...only one i use...i really like midwest industries products...they are my GO TO
Would recommend: Yes
1 of 1 found the following review helpful.
Nice product
OK it is a gas block, normally the great price and the fact that it works flawlessly would be enough to put it on your AR but Midwest Industries went the extra mile and made it low profile so it will fit under a slimline handguard easily.
Would recommend: Yes
2 of 2 found the following review helpful.
.625 gas block
Perfect tight fit on my 16-inch Faxon Pencil contoured barrel (which unfortunately is not dimpled for the set screws), and the gas block comes with 3 set screws for a more secure installation. Straight forward installation with no issues.
Would recommend: Yes
1 of 1 found the following review helpful.
Cover the cuts.
Fantastic gas block for those barrels with the cuts for the A2 gas block pins you have in the parts department.
If you happen to have one of these barrels, get a new build going with it, and use this gas block.
If you happen to have one of these barrels, get a new build going with it, and use this gas block.
Best Used for:
- Barrels with the cuts for the A2 Gas Block Pins.
Would recommend: Yes
Best gas block for A2 removal
If you want to remove the factory A2 front sight, this is the block to have. Premium product that fits tight, covers the complete area the previous A2 covered. Looks factory and you can run aftermarket longer handguards of your choice.
Best Used for:
- A2 sight removal
Would recommend: Yes
Low profile gas block
This product is amazing. It has a very snug and tight fit on my barrel. It is very high quality and came out of the box without any scratches or chips. For the money, this gas block is absolutely worth it.
Would recommend: Yes
Fits perfect, light weight and well machined. I will be buying another.
Fits under the hand guard perfectly and is light weight and well machined. At first I thought it might not be as solid as a pinned mount but after installing it I can tell you it isn't going anywhere.
Would recommend: Yes
2 of 2 found the following review helpful.
Midwest Industries low profile gas block
I really like this product especially for the price point. I feel it's better than a lot of other options that cost more. One thing that I really like about it is that it has 3 set screws compared to almost all the others only having 2 set screws. Id I do another build i will be using this again!
Pros:
- Excellent value
Cons:
- None
Would recommend: Yes
1 of 1 found the following review helpful.
There are no reviews that match your criteria. Would you like to review this product?