Your Browser is Outdated
Millett Angle-Loc Windage Adjustable Weaver-Style Rifle Scope Rings
Currently Unavailable
View Product
Compare (0)
1 item has been added
Add at least two items to compare
Most Helpful Positive Review
Nice and Solid Rings
I would highly recommend you lap these and any other ring. You will see what little contact they make holding your scope. Make sure you lap before and after making adjustments for windage. Windage screws are great for any misaligment your factory mounting holes may have.
Pros: Steel and Solid
Cons: Can be tricky
Millet Angle-Loc Scope Rings
Mounted a scope on a new rifle and ran out of windage adjustment. This happened on another rifle and I used the Angle-Lock rings to correct that problem. Ordered these and the problem was solved. They work great for this type of problem, just be careful to adjust both the front and rear rings so you don't put the scope tube in a bind.
Would recommend: Yes
Horrible Quality
i got my millett angle loc rings in, opened the plastic container and was not surprisingly disappointed. the rings, even though there were brand new, were extremely dirty. it is as if the rings were sprayed with oil saturated dust before shipping. the rings were covered in a grime that i can only describe as oil saturated dust. i still have no clue on what it actually was. anyways, the most important part of this review starts now. when i tightened the scope rings onto the scope i was deeply dissatisfied and quite angry to find out that the rings DO NOT EVEN CLAMP ONTO THE SCOPE! seriously millett? is your stuff that much of straight up garbage? the rings FULLY TIGHTENED DO NOT HOLD THE SCOPE IN PLACE! I got millett angle loc 1 inch low weaver/picatinny bases that are oversized for my scope tube. i am getting these replaced.
Pros:
- None
Cons:
- Low quality
- dirty
- does not even work
- being lied to from millett about top quality products
Best Used for:
- the trash can
Would recommend: No
0 of 1 found the following review helpful.
Millet angle loc rings
These rings are not worth the money that you are paying for them. Even if they were priced at $5, that would be too much. They are just that worthless for me. The machine work and the alignment of the rings are never consistent and will vary from one package to another. The allen head screws have a tendency to strip, the threading of the screws will strip. The one inch tubing is not even one inch. It seems smaller than one inch diameter. These just are a waste of money if you want perfection or close to perfection. If you disagree with this review. Pick up 3 different leupold rings and compare the craftsmanship and consistency of all the Leupold rings. These millet rings have no consistency and are slopped together.
Would recommend: No
0 of 1 found the following review helpful.
Love these rings
I have at least 10 rifles that have Millett rings on them.I was introduced to the angle loc rings about 16 years ago when my gunsmith recommended them for my Remington 700 BDL in 280 Remington and I have used nothing else since. when I outfit a rifle now it has Millet rings. The rings have always held true for me and haven't needed any tightening even though I do check them they are always tight.The windage adjustment is also a very good feature of the rings. Millet makes these rings in several finishes and models to fit almost any gun.
Would recommend: Yes
1 of 1 found the following review helpful.
MILLETT RINGS
THIS is about the third set of these I've owned and won't buy anything else for a grooved reciever.... AS GOOD AS IT GETS FOLKS.......
I STARTED BUYING THESE RINGS about 12 years ago. They are absolutely top notch in every way and HHHHHHHIGHLY RECOMMEND THEM TO ANYONE.
IF need be they can be adjusted for wind age, either way. Handy when moving a scope from another rifle that is already adjusted for zero on a different rifle....
One set of screws , socket style , that are both the same on the top of the rings and the base for the groove, very handy, unlike some that have two different screws .
Can't say enough good about em and glad the PLANET had these....
THANKS
RESPECTFULLY
TOOTY
I STARTED BUYING THESE RINGS about 12 years ago. They are absolutely top notch in every way and HHHHHHHIGHLY RECOMMEND THEM TO ANYONE.
IF need be they can be adjusted for wind age, either way. Handy when moving a scope from another rifle that is already adjusted for zero on a different rifle....
One set of screws , socket style , that are both the same on the top of the rings and the base for the groove, very handy, unlike some that have two different screws .
Can't say enough good about em and glad the PLANET had these....
THANKS
RESPECTFULLY
TOOTY
Would recommend: Yes
1 of 1 found the following review helpful.
great millet rings
Optics Planet was great as usual, rings came faster than expected had no problems, I can't say enough good things about this company, I always use them they are so helpful and even with a idiot like me they are patient and truly due whatever they can to help..I appreciate everything they do and would never use another company to order anything for my firearms. thanks again Optics Planet
Would recommend: Yes
1 of 1 found the following review helpful.
millet low engraved rings
Everything was great all the way around, thanks again optics planet
Would recommend: Yes
BN00010 millet Medium BRNO ZKM-611
good deal for a solid steel set of rings
Pros: easy to use, solid steel
Cons: kind of high for Medium height rings
Pros: easy to use, solid steel
Cons: kind of high for Medium height rings
Would recommend: Yes
1 of 2 found the following review helpful.
Great Scope Rings
I bought a set of medium high for my .22LR rifle scope. The windage adjustable features makes it easier to get the shot on paper. The finishing and craftmanship on these rings are very good for the price. They also holds zero very well. Good values for the money. Recommended!
Pros: Windage Adjustable
Pros: Windage Adjustable
Would recommend: Yes
3 of 4 found the following review helpful.
There are no reviews that match your criteria. Would you like to review this product?