Reviews & Ratings for NcSTAR AR15 Armorer's Wrench Gen2

NcSTAR AR15 Armorer's Wrench Gen2

$42.99 $30.99 Save 28%

View Product

Write a Review

Compare (0)

Most Helpful Positive Review THICKNESS....

I learned to buy 2 ..the fantastic Thick one and a THINNER one.pays to have two I honestly believe- they NEED to state THICKNESS....but it is THE BEST I have had....get one TODAY!!! Pros: BEAUTIFUL- HUSKY- GREAT TOOL...but Cons: on my S&W AR-15, it was TO THICK for the Castle Nut!

Most Helpful Negative Review Looks good, but looks don't get the job done

Many of the features of this tool will work well. It is the Barrel Nut end that is lacking. The tool is made out of less than optimum metal. In the hand it feels more like pot metal than a steel tool. I used the Barrel Nut end once and it bent with only moderate force being applied. There are better...
Read More...

Show

Sort by

Filter by

super high quality

by Louie, Verified Owner from VA, United States Written on April 11, 2026

This is a beast for an armorer's wrench. Super think metal you can really get in there and lean on it for those super tight barrel nuts. Well worth the price.

Was it helpful to you? Yes | No

Nice Quality

by REA, Verified Owner from KS, United States Written on March 3, 2026

The wrench arrived as descried, have not used yet, but the wrench appears to be of high quality and will be very useful.

Was it helpful to you? Yes | No

Does the job

by Brandon, Verified Owner from CA, United States Written on January 1, 2024

I have used this wrench for a number of builds and it works as intended. The metal can be a little soft especially around the sections for muzzle device swaps, it has worn a bit, but as long as you go slow it doesnt slip. Great wrench for the money!

Was it helpful to you? Yes | No

Nice product

by gene, Verified Owner from OH, United States Written on October 29, 2023

If you own an AR you will need a good wrench and this NcSTAR AR15 Armorer's Wrench Gen2 fits the bill and will not break the bank... It is heavy duty and an axtreamly useful tool that looks like it will last for years...

Was it helpful to you? Yes | No

Does the job

by Jimmy, Verified Owner from CO, United States Written on June 21, 2023

I have used this for two AR builds with no issues. I imagine it won't fit every combination of AR parts with all the variation out there, but it works for both of mine, using Faxon and Roscoe barrels and Midwest Industries and Stngr handguards. Seeing some reviews that mention it bending easily. I used a torque wrench every time I installed a barrel or muzzle device, wonder if people are over-tightening things? I'm sure there's better stuff out there, but if you're just doing a couple builds or swapping a barrel or two, I think this is up to the task.

Was it helpful to you? Yes | No

worst wrench I've ever used.

by Bill Ennis, Verified Owner from FL, United States Written on May 23, 2022

I missplaced my Wheeler when I moved and needed to pull a barrel. I pick this up due to the price, however when it showed up, the pins are all bent in slightly different directions. The material used is so poor the the pins wore down without even getting a turn out of the nut. This is a terrible product.

1 of 1 found the following review helpful.

Was it helpful to you? Yes | No

Absolute Garbage

by JP, Verified Owner from MT, United States Written on March 10, 2022

This wrench is terrible. I used it twice and when I went to use it the third time it wouldn't fit the nut. My neighbor pointed out to me that it was horribly bent out of shape. I had to hit it with a small sledgehammer to straighten it out enough to use again, and then I promptly threw it in the garbage. Total piece of trash. Now I am in the market for ANOTHER armorer's wrench. Buy once, cry once; Spend the extra $20 to get a quality wrench, or you'll end up like me.

Pros:

None

Cons:

poor quality

Best Used for:

A paperweight or trash

2 of 2 found the following review helpful.

Was it helpful to you? Yes | No

Pay $20 more for a real one.

by Yea, from WA, United States Written on September 6, 2021

It stripped and shaved off its angles during my first muzzle break swap. This is now in my trash bin. Thank you seller for having such nonsense for sale. Thank you supplier for making more junk in China.

4 of 4 found the following review helpful.

Was it helpful to you? Yes | No

Ar 15 TOOL

by crawfish, from AZ, United States Written on April 20, 2021

very good quality tool that works great. Met all my expectations. Did everything i wanted it to do and the quality is very good and durable would really recommend this for anyone that is wanting to working on Ar rifles

1 of 1 found the following review helpful.

Was it helpful to you? Yes | No

Buy a different one

by RD, Verified Owner from WI, United States Written on February 7, 2021

Soft metal. I got only one use out of it to tighten a castle nut before it broke. By the time I torqued the castle nut down to ~40ft/lb spec, the teeth deformed/rounded to the point that it wouldn't even grab anymore. I could almost scrape the metal off its teeth with my fingernail, which is pretty bad. I bet at higher torque for other uses, teeth will shear right off and/or the square drive socket will strip. Would not recommend if looking for long-term quality use. I should have known better, but just needed an extra wrench, but now I'm going to have to buy twice (a different one next time).

Pros:

Cheap fix

Cons:

Poor qaulity

Best Used for:

One time use

6 of 6 found the following review helpful.

Was it helpful to you? Yes | No

There are no reviews that match your criteria. Would you like to review this product?

FREE SHIPPING on Over 250,000 Products

Enjoy our FREE RETURNS

Reviews & Ratings for NcSTAR AR15 Armorer's Wrench Gen2 — 40 reviews — Page 1